APC
APC SMT750C Tower UPS 750 VA 500 W 6 NEMA 5-15R 16 GB USB 3.0
Tower UPS delivers 750 VA and 500 W through six NEMA 5-15R outlets with automatic voltage regulation and a SmartConnect Ethernet port for cloud monitoring, plus a bundled 16 GB USB 3.0 drive
- 750 VA / 500 W protects servers and network gear
- Automatic Voltage Regulation corrects utility fluctuations
- SmartConnect Ethernet Port enables cloud-based remote monitoring
- SmartSlot accepts optional Network Management Card for advanced management
- Includes 16 GB USB 3.0 drive for documentation and logs
Power protection capacity
The APC SMT750C is a tower uninterruptible power supply delivering 750 VA and 500 W of line-interactive pure sine wave output. It includes six NEMA 5-15R outlets and Automatic Voltage Regulation to correct utility fluctuations. A 16 GB USB 3.0 drive is bundled with the unit. Remote monitoring is available through a SmartConnect Ethernet port and an optional card can be added via the SmartSlot.
Suitability and limits
This UPS suits administrators protecting servers, storage, network gear, VoIP systems, desktop PCs or retail POS equipment. Graceful shutdown is supported over serial or USB using PowerChute software. Buyers who need longer runtime than the internal battery provides should look at models with extended battery modules. Environments requiring rackmount form factors or higher output capacity will need a different unit.
Deciding specification
The 500 W output power capacity is the single figure that determines whether this UPS can support your connected load. Verify that the total wattage of all devices you intend to protect stays below this limit. The tower dimensions are 6.34 in high, 5.43 in wide and 14.53 in deep, weighing 27.56 lb.
Highlights
- 750 VA / 500 W protects servers and network gear
- Automatic Voltage Regulation corrects utility fluctuations
- SmartConnect Ethernet Port enables cloud-based remote monitoring
- SmartSlot accepts optional Network Management Card for advanced management
- Includes 16 GB USB 3.0 drive for documentation and logs
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the SMT750C tower UPS and what step is often missed?
Plug the NEMA 5-15P input into a grounded wall outlet, connect devices to the six NEMA 5-15R outlets, then use the USB cable or optional Network Management Card in the SmartSlot for graceful shutdown — the step often missed is configuring PowerChute software or the card so the UPS can actually signal the attached systems.
What maintenance or replacement will the SMT750C need later?
The internal battery will require replacement after its service life; the unit weighs 27.56 lb (12.5 kg) and measures 6.34 in high × 5.43 in wide × 14.53 in deep, so plan access space for battery swap.
What limit appears first during sustained use of the SMT750C?
The 500 W / 750 VA output capacity is the first limit; once the connected load reaches 500 watts the UPS cannot supply more power and will transfer to battery until the runtime is exhausted.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



