APC
APC AP8702S-NAX340 Locking C13 to C14 Power Cord Kit 6 x .6m Red handheld pcs accessory
Six locking C13-to-C14 cords, each .6 m long, supplied in a red kit of six pieces
- Locking C13-C14 connectors prevent accidental disconnection
- Six cords included for multi-device rack deployments
- Short .6 metre length reduces cable clutter
- Red colour simplifies circuit identification in dense racks
APC Locking Power Cord Kit
This kit supplies six locking C13-to-C14 cords, each .6 metres long, in a red finish for North American outlets. It is intended for technicians securing power feeds to handheld PCs or PDAs where accidental disconnection would interrupt service.
Quick-lock installation avoids loose plugs
The C14 ends snap into matching inlets and lock with a simple push; the C13 ends do the same on the device side. No tools are required, but the cords are only .6 metres long, so builders needing longer runs or non-locking connectors must look elsewhere.
Highlights
- Locking C13-C14 connectors prevent accidental disconnection
- Six cords included for multi-device rack deployments
- Short .6 metre length reduces cable clutter
- Red colour simplifies circuit identification in dense racks
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the locking C13 to C14 cords are seated correctly after connecting them?
Each cord clicks audibly when the locking tab engages the C13 and C14 inlets, and the red jacket stays firmly seated without wiggle.
What does the AP8702S-NAX340 kit contain and is anything else needed?
The kit includes six locking C13 to C14 power cords, each .6 m long in red; no additional cords or adapters are required for standard North American rack PDU connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



