We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9-pin USB 2.0 internal splitter cable with male header and two female ports, 30cm length, adhesive backing

Aomoproing

Aomoproing 9 Pin USB 2.0 Male to 2 Female Splitter Cable 30cm

SKU CH-2MRE-QRS5R

Splits one internal 9-pin USB 2.0 header into two female ports with 30 cm shielded cable and 3M adhesive backing

  • Connector TypeLighting Connector to USB A
  • Splits one internal USB 2.0 header into two female ports for extra devices
  • 30 cm cable with wire-belt shielding keeps signals clean inside the case
  • 3M adhesive backing lets you fix the splitter securely to the motherboard or chassis
  • circuit prevention design protects pins from accidental contact or removal
  • Compatible with Windows 2000 through 10, Linux and Mac on any 9-pin USB 2.0 device

Internal USB 2.0 Header Splitter

This 9-pin male-to-dual-female cable adds two internal USB 2.0 ports from a single motherboard header. It measures 30 cm and includes 3M adhesive backing for secure mounting inside the chassis. The design incorporates wire-belt shielding and a short-circuit-prevention layout to protect pins during installation. It draws power directly from the motherboard header.

Builders expanding front-panel

Suitable for DIY light bars, PWM fans, or other 9-pin USB 2.0 devices that need an extra internal header. The combined current draw of both attached devices must not exceed the header's 500 mA supply limit. Builders whose peripherals need more power than the header can deliver should look at a powered hub instead. Compatibility spans Windows 2000 through 10, Linux and Mac on any 9-pin USB 2.0 header.

Mounting tape and splitter in one

The bundled 3M automotive-grade adhesive lets you fix the splitter to the motherboard or case without screws or zip ties. This keeps cables routed neatly and reduces the risk of accidental shorts from loose connectors. No additional software, drivers or external power adapters are included or required for operation.

Highlights

  • Splits one internal USB 2.0 header into two female ports for extra devices
  • 30 cm cable with wire-belt shielding keeps signals clean inside the case
  • 3M adhesive backing lets you fix the splitter securely to the motherboard or chassis
  • circuit prevention design protects pins from accidental contact or removal
  • Compatible with Windows 2000 through 10, Linux and Mac on any 9-pin USB 2.0 device

Specifications

Connector TypeLighting Connector to USB A

Questions about this item

What motherboard header does the 9-pin male connector plug into?

The male end fits a standard 9-pin USB 2.0 header on the motherboard.

Will the splitter work with devices that only support USB 1.1 speeds?

Yes, the cable carries USB 2.0 signals and remains backward compatible with USB 1.1 peripherals.

How can I confirm both female ports are delivering power after installation?

Connect a device to each port; if both enumerate and draw up to 500 mA total, the splitter is functioning correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.