We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron reducing tee with three female threaded ports

Anvil

Anvil Reducing Tee 2 x 3/4 x 1-1/4 FNPT Cast 300050606

SKU CH-D499-ZH7EP

A cast iron reducing tee with three FNPT ports, rated for 175 psi and 150 °F, meeting ASME B16.4, UL and FM standards

  • Reduces pipe size from 2 in to 3/4 in and 1-1/4 in for flexible plumbing design
  • Cast iron body rated to 175 psi at 150 °F for reliable high-pressure service
  • UL Listed and FM Approved meeting ASME B16.4 for code-compliant installations
  • Three FNPT connections allow direct threaded assembly without extra fittings
  • Operates from -20 °F to 150 °F covering steam and water applications

Reducing Tee for Three-Way Connections

This cast-iron reducing tee joins three female NPT pipes at 2 inch, 3/4 inch and 1-1/4 inch sizes. It is rated for 175 psi from -20 to 150 degrees F and 125 psi saturated steam. The fitting meets ASME B 16.4 and carries UL and FM approvals. It suits plumbing and fire-protection systems needing a durable branch connection.

Replaces Welded or Threaded Assemblies

A single casting eliminates the need to assemble multiple nipples, couplings and elbows on site. The jump is worth it when installation speed and leak-free joints matter more than the cost of separate fittings. Class 125 pressure rating matches standard low-pressure piping schedules. No special tools are required beyond normal pipe wrenches.

For Installers Using Female NPT Pipe

This tee fits projects that specify cast iron and FNPT threads in the three listed diameters. It is not for systems that require socket-weld, butt-weld or flanged connections. Buyers needing different branch sizes or a straight coupling should select another fitting. The 300050606 part number identifies this exact configuration.

Highlights

  • Reduces pipe size from 2 in to 3/4 in and 1-1/4 in for flexible plumbing design
  • Cast iron body rated to 175 psi at 150 °F for reliable high-pressure service
  • UL Listed and FM Approved meeting ASME B16.4 for code-compliant installations
  • Three FNPT connections allow direct threaded assembly without extra fittings
  • Operates from -20 °F to 150 °F covering steam and water applications

Specifications

BrandANVIL

Questions about this item

What pipe thread sizes does the 2 x 3/4 x 1-1/4 FNPT reducing tee accept?

The tee has three female NPT ports sized 2 inches, 3/4 inch and 1-1/4 inches for direct pipe connection.

How should the cast iron tee be sealed during installation, and what common mistake causes leaks?

Apply PTFE tape or pipe dope to the male threads only; over-tightening the cast iron body can crack it and create leaks.

When should the reducing tee be inspected or replaced given its pressure and temperature ratings?

Inspect annually if operating near the 175 psi or 150 °F limits; replace if corrosion, cracking or thread deformation appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.