We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel clevis hanger for 6 inch pipe, 10.25 inch height and width

Anvil

Anvil Clevis Hanger Size 6 2 1/2 To 5 In

SKU CH-A9TQ-14D60

Steel clevis hanger supports 6 in pipe with 1 1/2 in insulation and 750 lb load capacity

  • Supports pipe sizes from 2 1/2 to 5 inches for versatile installations
  • Handles loads up to 750 lb for secure heavy-duty hanging
  • Steel construction provides strength and durability in plumbing systems
  • Overall height of 10.25 inches fits standard clearance requirements
  • Compatible with 3/4 inch threaded rod for easy mounting

Anvil Clevis Hanger Size 6

The Anvil clevis hanger supports pipe runs up to six inches in diameter using a three-quarter inch threaded rod. Its steel construction delivers a load capacity of 750 lb for reliable overhead mounting. The hanger includes one and a half inches of insulation thickness for thermal protection. This component suits commercial and industrial piping installations.

Replaces worn or undersized hangers

Upgrade when existing supports show corrosion, deformation or insufficient load rating for the pipe weight. The jump is worth it if the current hardware cannot accommodate the required insulation thickness or rod size. Installers gain a secure fit that meets the specified 750 lb capacity without modifying the support structure.

Handles six-inch pipe with 750 lb rating

The hanger comfortably carries insulated pipe assemblies within the stated load limit at the given overall height and width of 10.25 in. It runs out when pipe weight exceeds the rated capacity or when rod diameter differs from three-quarter inch. Buyers needing larger pipe sizes or higher load ratings must select a different model.

Highlights

  • Supports pipe sizes from 2 1/2 to 5 inches for versatile installations
  • Handles loads up to 750 lb for secure heavy-duty hanging
  • Steel construction provides strength and durability in plumbing systems
  • Overall height of 10.25 inches fits standard clearance requirements
  • Compatible with 3/4 inch threaded rod for easy mounting

Specifications

BrandANVIL

Questions about this item

What threaded rod diameter does the Size 6 clevis hanger accept?

The hanger is made for a 3/4 in threaded rod, which threads into the top of the clevis body.

Which step is most often missed when hanging the clevis on a 6 in pipe with 1 1/2 in insulation?

Installers often forget to open the lower U-strap, set the pipe inside, then re-close and tighten both nuts evenly so the load stays centred.

When should the steel clevis hanger be inspected or replaced after installation?

Check the hanger whenever the system is depressurised; replace it if the steel shows corrosion, the threads are stripped, or the 750 lb load rating has been exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.