We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90-degree elbow fitting with 2 1/2 inch NPT female threads

Anvil

Anvil 90° Elbow 2 1/2" NPT Malleable Iron Class 150

SKU CH-R44X-V2SXM

A 90-degree galvanised malleable-iron elbow with 2 1/2-inch NPT female threads, rated Class 150 for Schedule 40 pipe at 300 psi

  • 90-degree elbow directs flow efficiently in tight piping layouts
  • Malleable iron construction resists cracking under mechanical stress
  • Galvanised coating protects against corrosion in damp environments
  • Class 150 rating suits Schedule 40 pipe at 300 psi working pressure
  • Female NPT threads on both ends simplify assembly with standard pipe

2 1/2 inch NPT malleable iron elbow

This Anvil 90-degree elbow connects two sections of 2 1/2 inch NPT threaded pipe in a galvanised malleable iron body rated Class 150. It suits Schedule 40 piping systems carrying water, oil or gas up to a maximum operating pressure of 300 psi at 150 degrees Fahrenheit. The female NPT threads on both ends accept standard male pipe threads for a secure joint.

Replaces worn or damaged threaded elbows

Swap this fitting in when an existing 2 1/2 inch NPT elbow shows corrosion, leakage or thread damage that compromises the seal. The Class 150 rating matches the original specification for Schedule 40 systems, so the upgrade is worthwhile whenever the line pressure and temperature stay within the 300 psi at 150 degrees F limit.

Fits Schedule 40 pipe with NPT threads

The elbow threads directly onto male NPT ends of 2 1/2 inch Schedule 40 pipe without welding or special tools. Its galvanised malleable iron construction resists corrosion in typical plumbing and industrial environments, freeing the installer from concerns about material compatibility with black iron or steel pipe. The compact 90-degree turn allows tight routing changes in crowded mechanical rooms or equipment skids.

Highlights

  • 90-degree elbow directs flow efficiently in tight piping layouts
  • Malleable iron construction resists cracking under mechanical stress
  • Galvanised coating protects against corrosion in damp environments
  • Class 150 rating suits Schedule 40 pipe at 300 psi working pressure
  • Female NPT threads on both ends simplify assembly with standard pipe

Specifications

BrandANVIL

Questions about this item

What size and thread type does the 2 1/2 inch NPT elbow require on the connecting pipes?

The fitting has 2 1/2 inch female NPT threads on both ends, so it connects to 2 1/2 inch male NPT pipe nipples or pipes cut with matching NPT threads.

How do I install the galvanized malleable iron elbow without damaging the threads?

Apply PTFE tape or pipe thread sealant to the male threads only, then hand-tighten before using a pipe wrench for the final one to two turns to reach the correct engagement.

When should the Class 150 galvanized elbow be inspected or replaced in a Schedule 40 system?

Inspect for external corrosion, white zinc-oxide deposits or leaks at each joint during routine system checks; replace the fitting if threads are stripped, the body is cracked or pressure tests exceed the 300 psi rating at 150 degrees Fahrenheit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.