We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil wide mouth beam clamp, malleable iron, 3/8 inch rod size

Anvil

Anvil 560009169 Wide Mouth Beam Clamp 3/8 In Rod Size

SKU CH-VYHB-9CRRD

A malleable-iron beam clamp with a wide mouth that accepts flanges up to 1-1/4 in. thick and supports 500 lb top or 250 lb bottom loads

  • Supports 500 lb top loads for heavy piping
  • 250 lb bottom capacity handles offset hangers
  • Malleable iron body resists job-site impact
  • Fits flanges up to 1-1/4 in thick
  • Includes set screw and locknut for fast install

Anvil Wide Mouth Beam Clamp 560009169

This Anvil beam clamp is made from malleable iron and accepts a 3/8 inch rod. It is designed for use under roof installations with bar joist construction or for attachment to the top or bottom flange of structural shapes. The clamp suits applications where the vertical hanger rod must be offset from the flange edge. It includes a set screw and locknut for secure fastening.

Load Limits and Flange Thickness

The clamp provides a maximum load of 500 pounds when mounted at the top and 250 pounds when mounted at the bottom. It accommodates joist or flange thicknesses that do not exceed 1 1/4 inches. These ratings define the safe working capacity for overhead support in industrial plumbing and mechanical installations. Exceeding these limits risks structural failure.

3/8 Inch Rod Compatibility

This clamp is manufactured specifically for a 3/8 inch rod size and will not fit larger or smaller diameter rods. Buyers using 1/2 inch or 1/4 inch threaded rod must select a different clamp model matched to their rod diameter. The fixed rod size is the primary specification that determines whether this part fits the existing hanger assembly.

Highlights

  • Supports 500 lb top loads for heavy piping
  • 250 lb bottom capacity handles offset hangers
  • Malleable iron body resists job-site impact
  • Fits flanges up to 1-1/4 in thick
  • Includes set screw and locknut for fast install

Specifications

BrandANVIL

Questions about this item

Which version of the Anvil Wide Mouth Beam Clamp should I choose for a 3/8 inch rod?

This model is specifically sized for a 3/8 inch rod and offers a 500 lb maximum load at the top or 250 lb at the bottom, so select it when those ratings match your design requirements.

What does the 500 lb load rating mean when the clamp is installed on a beam?

The 500 lb figure applies when the hanger rod is attached to the top hole of the clamp; if you use the bottom hole instead, the capacity drops to 250 lb, so plan your offset accordingly.

How does the C-type wide mouth design limit the flange thickness I can use?

The clamp accommodates flanges or joists up to 1-1/4 inches thick, and the set screw with locknut secures it to the top or bottom flange of structural shapes in bar joist construction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.