We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized hex bushing, male 2-1/2 inch NPT to female 2 inch NPT, malleable iron, safety yellow finish

Anvil

Anvil 319907960 galvanized hex bushing 2-1/2" MNPT x 2" FNPT

SKU CH-NVCQ-2VYS6

Galvanized malleable-iron hex bushing reduces 2-1/2 inch male NPT to 2 inch female NPT for Class 150 Schedule 40 piping at 300 psi

  • Class 150 rating handles 300 psi at 150 °F
  • Galvanized malleable iron resists corrosion in wet systems
  • Hex profile allows secure tightening with standard wrenches
  • 2-1/2" MNPT to 2" FNPT adapts pipe sizes directly
  • Schedule 40 compatible for standard pressure piping

Application scope

The Anvil 319907960 galvanized hex bushing connects a 2-1/2 inch male NPT thread to a 2 inch female NPT thread in Schedule 40 piping systems. It is intended for plumbers and maintenance technicians who need a straight reduction between those specific pipe sizes.

Upgrade path

This fitting replaces a plain coupling when a direct step-down is required without adding length or extra joints. The jump is worth it when the design calls for a single-piece transition that meets Class 150 pressure ratings and the galvanized coating matches the existing system.

Sustained performance

Rated for 300 psi at 150 degrees F maximum operating pressure, the malleable iron body maintains its seal under continuous service conditions. The galvanized finish resists corrosion over long periods, so the joint remains reliable through thermal cycles and extended duty without re-tightening.

Highlights

  • Class 150 rating handles 300 psi at 150 °F
  • Galvanized malleable iron resists corrosion in wet systems
  • Hex profile allows secure tightening with standard wrenches
  • 2-1/2" MNPT to 2" FNPT adapts pipe sizes directly
  • Schedule 40 compatible for standard pressure piping

Specifications

BrandANVIL

Questions about this item

What thread size does the 2-1/2" male NPT end of the Anvil 319907960 bushing require on the mating pipe?

The male end is 2-1/2" NPT and must be threaded into a matching 2-1/2" female NPT fitting; use pipe thread sealant and tighten to the standard NPT engagement depth.

Which step is most often missed when installing this galvanized hex bushing into a Schedule 40 system?

Applying thread sealant to the male NPT threads before assembly is the step most often skipped; without it the joint can leak at the 300 psi rating.

When should the Anvil 319907960 bushing be inspected or replaced in a 150 psi water system?

Inspect the galvanized coating and threads annually for corrosion or white rust; replace the bushing if the coating is breached or threads show deformation that could affect the Class 150 pressure seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.