We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee, three FNPT ports, matte black finish

Anvil

Anvil 310049804 Reducing Tee 2 x 1-1/2 x 2 FNPT pipe

SKU CH-GPPD-X42WT

Malleable-iron reducing tee connects 2-inch and 1-1/2-inch FNPT pipes at up to 300 psi

  • Reduces pipe size with 2" x 1-1/2" x 2" FNPT connections
  • Handles 300 psi at 150°F for demanding systems
  • Malleable iron body meets ASME B16.3 standard
  • UL Listed and FM Approved for safety compliance
  • Operates from -20°F to 150°F across wide temperature range

Anvil 2 x 1-1/2 x 2 FNPT Reducing Tee

The Anvil reducing tee is a malleable iron pipe fitting rated for Class 150 service. It connects three female NPT threads in a 2 inch by 1-1/2 inch by 2 inch configuration. The fitting carries UL listing and FM approval while meeting ASME B 16.3 standards for dimensional compliance.

Installers needing a branch from a 2 inch main line

This tee suits plumbing and hydronic systems where a 1-1/2 inch branch is required off a 2 inch run. It handles saturated steam up to 150 psi and water, oil or gas service up to 300 psi at 150 degrees F. Systems demanding higher pressure classes, different alloys or non-threaded connections must use alternative fittings.

Rated for 300 psi at 150 degrees F

The fitting comfortably handles standard commercial heating and cooling loops within its temperature range of -20 to 150 degrees F. It runs out of headroom above 300 psi working pressure or when saturated steam exceeds 150 psi. The Class 150 wall thickness does not support heavier Schedule 80 or high-pressure steam mains.

Highlights

  • Reduces pipe size with 2" x 1-1/2" x 2" FNPT connections
  • Handles 300 psi at 150°F for demanding systems
  • Malleable iron body meets ASME B16.3 standard
  • UL Listed and FM Approved for safety compliance
  • Operates from -20°F to 150°F across wide temperature range

Specifications

BrandANVIL

Questions about this item

What size male NPT fittings must I already have to connect this 2" x 1-1/2" x 2" FNPT reducing tee?

You need three male NPT fittings — two at 2 inches and one at 1-1/2 inches — to thread into the three female ports.

Will this Class 150 malleable-iron tee hold up next to older galvanised pipe rated for lower pressure?

Yes, it is rated 300 psi at 150 °F and 150 psi saturated steam, so it exceeds typical older galvanised ratings.

How can I confirm the tee meets ASME B16.3 after installation?

Look for the UL and FM markings cast on the body; they certify compliance with ASME B16.3.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.