We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil cast iron reducing tee with three female threaded ports

Anvil

Anvil 300041209 Reducing Tee 1-1/4 x 3/4 x 1 Inch FNPT Cast Iron

SKU CH-JNZ8-88E10

Cast-iron reducing tee joins 1-1/4, 3/4 and 1 inch FNPT pipes at up to 175 psi

  • Cast iron body resists corrosion for long service life
  • Three FNPT ports simplify threaded pipe connections
  • Rated 175 psi at up to 150 °F for reliable pressure handling
  • UL listed and FM approved meeting ASME B16.4 standards
  • Reducing design joins 1-1/4, 3/4 and 1 inch pipes in one fitting

Anvil Reducing Tee 1-1/4 x 3/4 x 1 Inch

This cast iron reducing tee connects three female NPT pipes of different sizes in a single fitting. The body is rated for 175 psi at temperatures from -20 to 150 degrees F and carries UL and FM approvals. It meets ASME B 16.4 standards for class 125 service.

Ideal for branch connections in steam or water lines

Installers needing a durable cast iron junction for reducing pipe diameters will find this fitting suitable. The FNPT threads accept standard male pipe threads without adapters. Builders requiring copper, PVC or stainless steel materials should select a different fitting type.

Class 125 cast iron rated 175 psi at 150 degrees F

The pressure and temperature rating is the primary specification that determines whether this tee matches the system design. Verify that the operating conditions stay within the listed limits before installation. The UL and FM markings confirm compliance with recognised safety standards.

Highlights

  • Cast iron body resists corrosion for long service life
  • Three FNPT ports simplify threaded pipe connections
  • Rated 175 psi at up to 150 °F for reliable pressure handling
  • UL listed and FM approved meeting ASME B16.4 standards
  • Reducing design joins 1-1/4, 3/4 and 1 inch pipes in one fitting

Specifications

BrandANVIL

Questions about this item

What pipe sizes must my existing lines be to connect to the 1-1/4 x 3/4 x 1 inch FNPT openings?

You need three female NPT pipes matching 1-1/4 inch, 3/4 inch and 1 inch so each branch threads directly into the cast-iron tee.

Will the Class 125 cast-iron body handle the same 175 psi at 150 °F that my older steel fittings are rated for?

Yes, the tee is rated 175 psi from -20 °F to 150 °F and 125 psi saturated steam, matching typical Class 125 pressure limits.

How can I confirm the tee meets code after installation?

Look for the UL Listed and FM Approved markings on the body and verify the ASME B16.4 stamp before pressurising the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.