We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron reducing tee with three female NPT ports, dark rough finish

Anvil

Anvil 300036001 Reducing Tee 3/4" x 3/4" x 1/4" FNPT Cast

SKU CH-MR5T-AP55T

Cast iron reducing tee connects three female NPT pipes at 3/4", 3/4" and 1/4" with 175 psi rating

  • Connects three pipe sizes with cast-iron durability
  • Rated 175 psi at temperatures from -20 to 150 °F
  • Saturated steam service up to 125 psi
  • UL Listed and FM Approved for code compliance
  • Meets ASME B 16.4 dimensional standard

Reducing Tee 3/4" x 3/4" x 1/4" FNPT

This Anvil cast iron reducing tee connects three female NPT pipes at two different sizes. It is designed for plumbing installations requiring a branch connection from a 3/4 inch main line to a 1/4 inch outlet. The fitting suits residential and commercial water or steam systems.

Pressure and Temperature Limits

The Class 125 fitting handles a maximum pressure of 175 psi across a temperature range of -20 to 150 degrees F. For saturated steam service the rating is 125 psi. These limits define the safe operating envelope for the installed piping network.

UL Listed and FM Approved

This tee meets ASME B16.4 standards and carries both UL Listed and FM Approved certifications. That compliance status is the decisive factor for projects requiring code-accepted components in fire protection or general plumbing applications.

Highlights

  • Connects three pipe sizes with cast-iron durability
  • Rated 175 psi at temperatures from -20 to 150 °F
  • Saturated steam service up to 125 psi
  • UL Listed and FM Approved for code compliance
  • Meets ASME B 16.4 dimensional standard

Specifications

BrandANVIL

Questions about this item

Which reducing tee size matches a 3/4 inch main line with a 1/4 inch branch?

This tee has two 3/4 inch FNPT ends and one 1/4 inch FNPT end, so it connects a 3/4 inch run to a 1/4 inch outlet.

What does the 175 psi rating mean when the fitting is installed?

It can handle up to 175 psi at temperatures from -20 to 150 degrees F, and 125 psi for saturated steam service.

What does the FNPT connection type cap in practice?

The female NPT threads seal with standard pipe tape or sealant and meet ASME B16.4 dimensions for Class 125 cast iron fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.