We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45 degree street elbow with female and male threaded ends

Anvil

Anvil 3/8" FNPT x MNPT Galvanized 45° Street Elbow

SKU CH-ZYKF-B0EPW

Galvanized malleable-iron 45-degree street elbow connects 3/8" FNPT to MNPT threads at 300 psi

  • Galvanized malleable iron resists corrosion in wet systems
  • 45° street elbow changes direction in tight pipe runs
  • 3/8 in FNPT x MNPT threads connect without extra fittings
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard weight pipe

Pipe Fitting Application

This Anvil galvanized street elbow connects a 3/8 inch female NPT thread to a 3/8 inch male NPT thread at a 45 degree angle. It is built from malleable iron for mechanical strength in piping systems. The Class 150 rating suits Schedule 40 pipe installations. Plumbers and maintenance technicians use it to change direction in water, air or gas lines.

Pressure And Temperature Limit

The single specification that decides fit is the 300 psi maximum operating pressure at 150 degrees Fahrenheit. Systems running above this pressure or temperature need a higher-class fitting. Verify your line pressure and media temperature before installation to avoid over-rating the component.

Sustained Service Behaviour

Under continuous load the galvanized coating resists corrosion from moisture and condensate inside the pipe. Malleable iron maintains its shape without cracking when the system cycles between pressure and vacuum. The threaded joints hold seal integrity through thermal expansion and vibration typical of long-running plumbing networks.

Highlights

  • Galvanized malleable iron resists corrosion in wet systems
  • 45° street elbow changes direction in tight pipe runs
  • 3/8 in FNPT x MNPT threads connect without extra fittings
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard weight pipe

Specifications

BrandANVIL

Questions about this item

What does the 45-degree angle do inside a pipe run?

The 45-degree bend changes flow direction more gradually than a sharper turn, helping maintain smoother flow through the fitting.

What does the Class 150 rating and 300 psi limit mean for my system?

Class 150 sets the pressure class for Schedule 40 pipe; the fitting handles up to 300 psi at 150 °F, capping the maximum working pressure of the joint.

What thread sizes and types does this elbow need to connect?

It has a 3/8-inch female NPT thread on one end and a 3/8-inch male NPT thread on the other, both tapered for sealing with thread compound or tape.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.