We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-foot black steel pipe nipple non-threaded Schedule 80

Anvil

Anvil 3/4" x 6 ft Non-Threaded Black Pipe Nipple Sch 80

SKU CH-C3SH-N7CGX

Schedule 80 black steel pipe nipple, 6 ft long with non-threaded ends for welding, rated to 2000 psi at 150 °F

  • Schedule 80 wall handles 2000 psi at 150°F
  • Non-threaded ends allow custom welding or threading
  • Continuous weld construction meets ASTM A53 Type F Grade A
  • Black steel resists corrosion in water and gas lines
  • 6 ft length suits long runs without extra couplings

3/4" Black Steel Pipe Nipple

This 3/4-inch nominal Schedule 80 black steel pipe nipple measures six feet overall with a continuous weld. It has a non-threaded connection type, an inside diameter of 13/16 inch and an outside diameter of 1 3/64 inches. The wall thickness is 9/64 inch and it meets ASTM A53 Type F Grade A standards.

Suitable Uses and Limitations

It suits installers needing a plain-end Schedule 80 section for welding into high-pressure steam or water lines rated to 300 psi steam and 2000 psi at 150 degrees Fahrenheit. It is not for systems that require threaded ends, thinner-wall pipe, or materials certified for potable water contact.

Deciding Specification

The continuous-weld non-threaded Schedule 80 black steel construction with a 2000 psi pressure rating at 150 degrees Fahrenheit determines whether this nipple fits the intended piping system.

Highlights

  • Schedule 80 wall handles 2000 psi at 150°F
  • Non-threaded ends allow custom welding or threading
  • Continuous weld construction meets ASTM A53 Type F Grade A
  • Black steel resists corrosion in water and gas lines
  • 6 ft length suits long runs without extra couplings

Specifications

BrandBECK

Questions about this item

How much pressure can the Schedule 80 black steel pipe handle at 150 degrees Fahrenheit?

The pipe is rated for a maximum of 2000 psi at 150 degrees Fahrenheit and 300 psi for steam service.

Does the continuous-weld construction generate noticeable heat during extended use?

The pipe is a passive conduit with no moving parts or power draw, so it produces no operational heat or noise.

What fittings are required to connect the non-threaded ends?

The non-threaded ends require welding or compatible non-threaded couplings such as grooved or compression fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.