We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel non-threaded pipe nipple 12 inches long 2 inch nominal size Schedule 80

Anvil

Anvil 2" x 12" Non-Threaded Black Pipe Nipple Sch 80

SKU CH-FAEH-BH896

Schedule 80 black steel nipple, 12 in long, non-threaded for welding, rated to 1500 psi at 150 °F

  • Schedule 80 wall handles 1500 psi at 150 °F
  • Non-threaded ends allow custom welding or flanged connections
  • Black steel construction meets ASTM A53 Type F Grade A
  • 12 inch length fits standard two-inch piping runs
  • 13/64 inch wall thickness provides heavy-duty durability

2-Inch Schedule 80 Black Steel Pipe Nipple

This 12-inch black steel nipple is manufactured to Schedule 80 specifications for high-pressure piping systems. It features a non-threaded, continuous welded connection suitable for welding into place. The pipe has a nominal size of 2 inches with a 13/64-inch wall thickness. It is intended for installers who need a plain-end section to join by welding rather than threading.

Sustained Pressure Rating Up To 1500 Psi

The nipple is rated for a maximum working pressure of 1500 psi at 150 degrees Fahrenheit. This rating applies to continuous service conditions rather than short-term bursts. For steam applications the maximum pressure is 300 psi WSP. The continuous weld construction and Schedule 80 wall maintain integrity under these sustained loads.

ASTM A53 Type F Grade A Compliance

This pipe meets the ASTM A53 Type F Grade A standard for furnace-welded pipe. The standard defines the material quality and testing requirements for this grade of black steel. The non-threaded ends mean the installer must prepare the joint by welding according to applicable piping codes. The 2 1/16-inch inside diameter and 2 3/8-inch outside diameter are fixed by the standard dimensions.

Highlights

  • Schedule 80 wall handles 1500 psi at 150 °F
  • Non-threaded ends allow custom welding or flanged connections
  • Black steel construction meets ASTM A53 Type F Grade A
  • 12 inch length fits standard two-inch piping runs
  • 13/64 inch wall thickness provides heavy-duty durability

Specifications

BrandBECK

Questions about this item

How much heat can the 2 inch Schedule 80 nipple handle when running continuously?

The nipple is rated for 150 degrees F at 1500 psi and 300 psi steam pressure, so it tolerates sustained high temperatures in hot-water or steam lines.

What fittings are required to join this non-threaded nipple to the rest of the system?

Because the nipple has no threads, it must be welded into place using compatible Schedule 80 weld fittings or flanges.

Will the 13/64 inch wall thickness match the bore of existing ASTM A53 Grade A piping?

Yes, the nipple meets ASTM A53 Type F Grade A with a 13/64 inch wall, matching the same standard and wall thickness used in many existing black-steel installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.