We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two-inch black steel pipe nipple, three feet long, non-threaded, Schedule 80

Anvil

Anvil 2 in x 3 ft Non-Threaded Black Pipe Nipple Sch 80

SKU CH-K1Y1-P5102

Schedule 80 black steel pipe nipple, 2-inch nominal size, three-foot length, non-threaded for welding, rated 1500 psi at 150°F and 300 psi steam, ASTM A53 compliant

  • Schedule 80 rating handles 1500 psi at 150°F
  • Continuous welded construction ensures leak-free performance
  • Non-threaded ends allow custom welding connections
  • ASTM A53 Grade A steel meets strict quality standards
  • 3-foot length provides flexible installation options

Anvil 2 in Non-Threaded Black Pipe Nipple

This Schedule 80 nipple is a 3 ft length of welded black steel pipe with a 2 in nominal bore. It has no factory threads so it is intended for field welding or grooved couplings in pressure piping systems. The continuous weld construction meets ASTM A53 Type F Grade A requirements for mechanical and pressure applications.

Suits installers needing plain-end Schedule 80

Builders who require threaded or grooved ends ready for screw or mechanical joints should select a different product. The plain ends also mean this nipple cannot be used with compression or push-fit fittings that grip a prepared surface. California Proposition 65 warnings apply because the steel contains listed chemicals.

1500 psi pressure rating at 150 Degrees F

This maximum working pressure is the key figure for deciding whether the nipple matches the system design pressure. The 300 psi steam rating and 13/64 in wall thickness support the same pressure class. If the service pressure exceeds 1500 psi at the operating temperature, a heavier schedule or alternative material is required.

Highlights

  • Schedule 80 rating handles 1500 psi at 150°F
  • Continuous welded construction ensures leak-free performance
  • Non-threaded ends allow custom welding connections
  • ASTM A53 Grade A steel meets strict quality standards
  • 3-foot length provides flexible installation options

Specifications

BrandBECK

Questions about this item

What does the 1500 psi @ 150 °F rating mean for actual use?

The pipe nipple is rated to hold 1500 psi at 150 °F, so it can handle high-pressure water or oil lines at that temperature without exceeding its design limit.

How does the non-threaded connection type affect installation?

With no threads, the 2 in nominal pipe must be welded or joined with a mechanical coupling; it cannot be screwed directly into threaded fittings.

What wall thickness and outside diameter should I allow for when fitting this nipple?

The wall is 13/64 in thick and the outside diameter is 2 3/8 in, so brackets, insulation or sleeves must clear those dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.