We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe nipple, 12 inches long, non-threaded, Schedule 80

Anvil

Anvil 2-1/2" x 12" Black Pipe Nipple Sch 80 Non-Threaded

SKU CH-T49V-BSB9H

A 12-inch Schedule 80 black steel pipe nipple with non-threaded ends, rated for 1000 psi at 150 degrees F

  • Schedule 80 wall handles 1000 psi at 150 °F
  • Continuous weld construction resists leaks under pressure
  • Non-threaded ends allow direct welding for secure joints
  • Black steel body withstands 300 psi steam service
  • ASTM A53 Type F Grade A certified for code compliance

Application Scope

This 2-1/2 inch Schedule 80 black steel nipple handles water pressure up to 1000 psi at 150 degrees F and steam pressure up to 300 psi. The 17/64 inch wall thickness and welded construction suit industrial plumbing and mechanical piping. It is not for threaded assemblies or low-pressure residential lines that require lighter wall schedules.

Capacity and Headroom

The 12 inch overall length provides a fixed spacer between flanged or welded components with a 2 15/32 inch inside diameter for flow. Maximum ratings are 1000 psi at 150 degrees F for water and 300 psi WSP for steam. The non-threaded ends rule out direct screw connections without additional fabrication.

Build and Connections

Continuous weld pipe type meets ASTM A53 Type F Grade A standards for consistent seam integrity. Black steel finish suits welding, grooving or flanging on site. The 2 7/8 inch outside diameter matches Schedule 80 fittings. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Schedule 80 wall handles 1000 psi at 150 °F
  • Continuous weld construction resists leaks under pressure
  • Non-threaded ends allow direct welding for secure joints
  • Black steel body withstands 300 psi steam service
  • ASTM A53 Type F Grade A certified for code compliance

Specifications

BrandBECK

Questions about this item

Will the 2 1/2 inch nominal size and 12 inch length match my existing Sch 80 black steel piping?

Yes, the nipple is Schedule 80 black steel with a 2 1/2 inch nominal pipe size, 12 inch overall length, 2 7/8 inch outside diameter and 2 15/32 inch inside diameter, so it aligns with standard Sch 80 dimensions.

How can I verify the nipple holds pressure after I weld it into the line?

Hydrostatically test the completed joint to the rated 1000 psi at 150 degrees F, or to 300 psi WSP for steam service, and inspect the continuous weld for leaks.

Does the package include any gaskets, flange bolts or thread sealant for the non-threaded ends?

No, the box contains only the bare 12 inch non-threaded black steel nipple; gaskets, flange hardware and sealant must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.