We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon-steel pipe clamp, galvanised finish, 1 1/2 inch size, 4 5/16 inch length

Anvil

Anvil 0500345053 Pipe Clamp Trap 1 1/2 In 4 5/16 In L

SKU CH-W7ES-3NDG8 MPN 0500345053

Carbon steel pipe clamp rated for 800 lb at 650°F, meeting UL, ULC, FM and federal standards

  • TypeDrain Components
  • Supports heavy piping with 800 lb load capacity at 650°F
  • Carbon steel construction with hot-dip galvanised finish resists corrosion
  • Meets Federal Specification A-A-1192A Type 4 and ANSI/MSS SP-69 standards
  • UL, ULC listed and FM approved for safety compliance
  • Metal detectable design aids maintenance and inspection operations

Pipe Clamp for 1 1/2 Inch Pipe

The Anvil 0500345053 pipe clamp is designed to secure 1 1/2 inch piping in commercial and industrial installations. It suits contractors and maintenance teams suspending cold water lines or hot lines up to 650 degrees Fahrenheit where insulation is not required. The carbon steel construction handles a maximum load of 800 pounds. Hot-dip galvanised finish resists corrosion in demanding environments.

Verify Pipe Size and Load Requirements

Confirm the existing pipe measures exactly 1 1/2 inches before ordering. Ensure the support structure can accommodate the 4 5/16 inch overall length and 5/16 inch thread size. Check that the 800 pound load rating at 650 degrees Fahrenheit meets the system design pressure and weight. The clamp carries UL, ULC and FM approvals plus compliance with Federal Specification A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 Type 4 standards.

Integrates with Threaded Rod Hangers

The 5/16 inch thread accepts standard threaded rod for suspension from beams or ceilings. Carbon steel body and hot-dip galvanised coating free the installer from worrying about rust on hot or cold lines. Metal detectable construction helps locate the clamp inside walls or insulation. No insulation clearance is needed, simplifying layout on tight pipe runs. Standards compliance eases inspection sign-off.

Highlights

  • Supports heavy piping with 800 lb load capacity at 650°F
  • Carbon steel construction with hot-dip galvanised finish resists corrosion
  • Meets Federal Specification A-A-1192A Type 4 and ANSI/MSS SP-69 standards
  • UL, ULC listed and FM approved for safety compliance
  • Metal detectable design aids maintenance and inspection operations

Specifications

BrandAnvil
Model0500345053
TypeDrain Components

Questions about this item

Does the Anvil 0500345053 pipe clamp include mounting hardware or must I buy bolts separately?

The clamp is sold as a single carbon steel unit with a hot-dip galvanised finish; fasteners are not included and must be sourced separately to match the 5/16 in thread size.

How do I decide between this 1 1/2 in size and other diameters in the Anvil range?

Choose this model when the pipe outside diameter is 1 1/2 in; the 4 5/16 in overall length and 800 lb load rating at 650 °F suit medium-duty hot or cold lines without insulation.

What does the 800 lb at 650 °F rating mean once the clamp is installed on a steam line?

It confirms the clamp can safely support up to 800 lb while the pipe runs at 650 °F, meeting UL, ULC, FM and Federal Specification A-A-1192A Type 4 requirements for hot-line suspension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.