We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil carbon steel pipe clamp, hot-dip galvanized finish, 1-1/4 inch pipe size

Anvil

Anvil 0500345046 Pipe Clamp Trap 1-1/4 In 4-1/8 In 500 Lb 650 Deg F

SKU CH-0ZCV-SG54F MPN 0500345046

A carbon-steel pipe clamp rated for 500 lb at 650 Deg F, hot-dip galvanised and UL, ULC, FM approved to federal and MSS standards

  • TypeDrain Components
  • Supports 500 lb load at 650 °F
  • Hot-dip galvanized carbon steel resists corrosion
  • Meets UL, ULC, FM and federal specs
  • Fits 1-1/4 in pipe with 4-1/8 in length
  • Metal detectable for safety compliance

Pipe Clamp for 1-1/4 Inch Pipe

The Anvil 0500345046 is a carbon steel pipe clamp sized for 1-1/4 inch pipe with a 4-1/8 inch length. It is designed for suspending cold pipe lines or hot lines where insulation is not required. The clamp carries a maximum load of 500 lb at 650 degrees F. It suits installers needing a medium-duty hanger for standard piping runs.

Thermals and load capacity

The carbon steel body with hot-dip galvanized finish handles continuous temperatures up to 650 degrees F while supporting 500 lb. No moving parts or insulation contact means silent operation and no additional power draw. The construction meets Federal Specification A-A-1192A Type 4 and WW-H-171-E Type 4 for reliable thermal performance.

500 lb at 650 degrees F rating

The decisive specification is the 500 lb maximum load at 650 degrees F, which determines suitability for high-temperature piping systems. Buyers who need a higher load rating or a clamp compatible with insulated lines cannot use this model. The UL, ULC and FM approvals confirm compliance for standard fire protection and plumbing installations.

Highlights

  • Supports 500 lb load at 650 °F
  • Hot-dip galvanized carbon steel resists corrosion
  • Meets UL, ULC, FM and federal specs
  • Fits 1-1/4 in pipe with 4-1/8 in length
  • Metal detectable for safety compliance

Specifications

TypeDrain Components
BrandAnvil
Model0500345046

Questions about this item

How do I install the 5/16-inch threaded rod into the clamp and what step is often missed?

Thread the 5/16-inch rod through both clamp ears and tighten the nuts evenly; the step often missed is confirming the pipe sits fully in the saddle before final torque.

Will the hot-dip galvanized carbon steel need recoating or replacement after high-temperature service?

The hot-dip galvanized finish is designed for 650 °F continuous exposure; inspect annually for zinc depletion and replace the clamp if the coating is worn through to bare steel.

At what load or temperature does the 500 lb rating at 650 °F become the limiting factor during sustained use?

The 500 lb maximum load at 650 °F is the design limit; exceeding either the load or the temperature reduces the safety margin defined by MSS SP-58 Type 4.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.