We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised carbon-steel insulation shield, 12 in long, fits 3/4 to 3 in pipe

Anvil

Anvil 0500340062 Insulation Protection Shield trap

SKU CH-8VAG-JV963 MPN 0500340062

Protects pipe insulation with a 12-inch galvanised carbon-steel shield for 3/4 to 3-inch pipes

  • TypeDrain Components
  • MaterialCarbon Steel
  • Galvanised carbon steel resists corrosion on drain lines
  • Fits 3/4 to 3 inch pipe with up to 2 inch insulation
  • 12 inch length covers standard insulation outer diameter
  • Meets A-A-1192A Type 40 and WW-H-171-E Type 41 standards
  • Conforms to ANSI/MSS SP-69 and MSS SP-5 Type 40 specifications

Insulation Protection Shield for Pipe Runs

The Anvil 0500340062 insulation protection shield is a drain component made from 18 gauge galvanised carbon steel. It is designed to protect pipe insulation on pipe sizes ranging from 3/4 to 3 inches. The shield accommodates insulation thicknesses between 3/4 and 2 inches with an insulation outside diameter of 5 inches. It measures 12 inches in length and meets standards A-A-1192A Type 40, WW-H-171-E Type 41, ANSI/MSS SP-69 and MSS SP-5 Type 40.

Suitable Applications and Limitations

This shield suits installers who need to support and protect insulated piping within the specified size range in commercial or industrial plumbing systems. It is not intended for uninsulated pipe runs or for pipes outside the 3/4 to 3 inch diameter range. Buyers requiring different insulation thicknesses or shield lengths should look at alternative support products.

Critical Sizing Specification

The decisive factor is the pipe size range of 3/4 to 3 inches combined with the insulation thickness capacity of 3/4 to 2 inches. Confirm that both the pipe diameter and the insulation thickness fall within these limits before selecting this shield.

Highlights

  • Galvanised carbon steel resists corrosion on drain lines
  • Fits 3/4 to 3 inch pipe with up to 2 inch insulation
  • 12 inch length covers standard insulation outer diameter
  • Meets A-A-1192A Type 40 and WW-H-171-E Type 41 standards
  • Conforms to ANSI/MSS SP-69 and MSS SP-5 Type 40 specifications

Specifications

TypeDrain Components
MaterialCarbon Steel
BrandAnvil
Model0500340062

Questions about this item

How much heat does the Anvil 0500340062 shield radiate when installed on a hot pipe running all day?

The carbon-steel shield acts as a passive barrier; it does not generate heat and its galvanized surface reflects thermal energy away from the insulation.

What pipe sizes and insulation thicknesses must I already have for the 3/4-to-3-inch range to fit?

It fits pipes from 3/4 to 3 inches with insulation thickness between 3/4 and 2 inches, covering an outer diameter up to 5 inches.

Will the 12-inch shield align with older hangers built to ANSI/MSS SP-69 or MSS SP-5 Type 40 spacing?

Yes, the shield meets ANSI/MSS SP-69 and MSS SP-5 Type 40, so it matches the hanger spacing and load ratings of existing compliant hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.