We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil carbon steel pipe hanger for five inch pipe with five eighths inch rod slot

Anvil

Anvil 0500300694 trap 5 in pipe 5/8 in rod 550 lb carbon steel

SKU CH-B1K2-W4VV8 MPN 0500300694

Supports 5 in pipe with 5/8 in rod, rated for 550 lb load using carbon steel construction meeting A-A-1192A and ANSI/MSS SP-69 standards

  • TypeDrain Components
  • MaterialHAWA
  • Carbon steel construction supports heavy pipe runs
  • 550 lb rated capacity handles demanding loads
  • T-slot design allows side bolt adjustment after installation
  • Meets A-A-1192A, ANSI/MSS SP-69 and MSS SP-58 standards
  • Fits 5 in pipe with 5/8 in rod for secure suspension

5-Inch Carbon-Steel Pipe Hanger

The Anvil 0500300694 is a carbon-steel pipe and conduit hanger designed for 5-inch pipe sizes. It supports a maximum load of 550 lb and accepts a 5/8-inch rod for suspension or wall attachment. A T-slot allows the side bolt to be installed after the pipe is positioned. The hanger meets A-A-1192A Type 5, ANSI/MSS SP-69 and MSS SP-58 Type 5 standards.

Suited For && Unsuitable For

This hanger suits installers securing 5-inch pipe runs in commercial or industrial piping systems where a 550 lb load rating is sufficient. It is not for applications requiring a higher load capacity or a different pipe diameter. Buyers needing alternative rod sizes or non-carbon-steel materials should look elsewhere.

5-Inch Pipe Size Compatibility

The critical specification is the 5-inch pipe size designation, which determines whether this hanger matches the installed piping. Verify the pipe outer diameter before ordering to ensure proper fit and support.

Highlights

  • Carbon steel construction supports heavy pipe runs
  • 550 lb rated capacity handles demanding loads
  • T-slot design allows side bolt adjustment after installation
  • Meets A-A-1192A, ANSI/MSS SP-69 and MSS SP-58 standards
  • Fits 5 in pipe with 5/8 in rod for secure suspension

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500300694

Questions about this item

What rod diameter is required to suspend this 550 lb carbon steel hanger?

The hanger is designed for a 5/8 in rod, which corresponds to the 69 figure in the model data.

Will the T-slot side bolt clear the threads on my existing 5/8 in all-thread rod?

Yes, the T-slot permits the side bolt to be installed after the pipe is set, so it works with standard 5/8 in threaded rod.

How can I verify the hanger meets the 550 lb rating once it is installed?

Confirm the pipe sits centred in the cradle, the side bolt is fully tightened in the T-slot, and the rod or wall bracket shows no deflection under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.