We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil clevis hanger size 4 malleable iron with insulation saddle system

Anvil

Anvil 0500173349 Clevis Hanger Trap Size 4 1 1/2 To 3 In

SKU CH-DCDF-NFEGG MPN 0500173349

Clevis hanger with insulation saddle supports 1 1/2 to 3 inch pipe at up to 550 lb load

  • TypeDrain Components
  • Supports up to 550 lb load for secure piping
  • Malleable iron construction ensures long-lasting strength
  • Insulation saddle accommodates 1/2 to 1 in thickness
  • ASTM E84 Class 1 25-60 rating meets fire standards
  • UL 94 VO rated for flame resistance

Anvil Clevis Hanger Size 4

The Anvil 0500173349 is a malleable iron clevis hanger designed for pipe sizes 1 1/2 to 3 inches. It includes an insulation saddle system suitable for commercial and industrial piping installations. Contractors use it to support insulated pipe runs securely.

Thermals noise and power draw

This mechanical support has no electrical components, so it produces no noise and draws no power. The carbon steel construction handles ambient temperature variations in typical plumbing environments. No thermal management is required for this component.

Sustained load behaviour

The hanger is rated for a maximum load of 550 lb under continuous service. It meets ASTM E84 Class 1 with a 25-60 rating and UL E94 VO for fire performance. The insulation saddle accommodates 1/2 to 1 inch thickness and 1 to 2 inch OD. Builders needing higher load capacity or different pipe diameters should select another model.

Highlights

  • Supports up to 550 lb load for secure piping
  • Malleable iron construction ensures long-lasting strength
  • Insulation saddle accommodates 1/2 to 1 in thickness
  • ASTM E84 Class 1 25-60 rating meets fire standards
  • UL 94 VO rated for flame resistance

Specifications

TypeDrain Components
BrandAnvil
Model0500173349

Questions about this item

How do I install the Anvil 0500173349 clevis hanger and what is the common mistake with the insulation saddle?

Attach the hanger to the structure, place the pipe in the saddle, then tighten the lower nut to secure the insulation saddle system; the step often missed is adjusting the saddle for the 1/2 to 1 in insulation thickness before final tightening.

What maintenance or replacement will the Anvil 0500173349 clevis hanger need over time?

Inspect the malleable iron body and carbon steel hardware periodically for corrosion or deformation; replace the hanger if the insulation saddle cracks or the pipe load exceeds the 550 lb rating.

What is the first limit reached on the Anvil 0500173349 clevis hanger under sustained heavy load?

The 550 lb maximum load rating is the primary limit; sustained loads at or above this value risk permanent deformation of the malleable iron clevis or failure of the carbon steel components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.