We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron beam clamp, tong style, 7/8 inch rod size

Anvil

Anvil 0500095401 Beam Clamp 7/8 in Malleable Iron

SKU CH-M39J-JY6H4

A malleable-iron beam clamp for 7/8 in threaded rod, rated to 1,365 lb and meeting ANSI/MSS SP-69 Type 30 with cUL, UL and FM approvals

  • ColorTransparent
  • Supports 1,365 lb load capacity
  • Fits 7/8 in threaded rod securely
  • Malleable iron construction for durability
  • Meets ANSI/MSS SP-69 and UL standards
  • Includes locknut for reliable installation

Tong-Style Beam Clamp for 7/8" Rod

This Anvil beam clamp attaches to the bottom centre of an H-beam up to 7 in wide. The malleable-iron body accepts a 7/8 in threaded rod and includes a locknut. It is rated for a 1,365 lb load and carries UL, cUL and FM approvals.

For H-beam installations with centred rod attachment

Suits installers who need a bottom-centre mount on standard H-beams. Not for flanges wider than 7 in, not for side-mount or top-mount configurations, and not for rod sizes other than 7/8 in.

Load capacity of 1,365 lb

The 1,365 lb rating is the primary figure that determines whether this clamp can support the intended pipe or conduit weight. Verify the applied load against this limit before specifying the part.

Highlights

  • Supports 1,365 lb load capacity
  • Fits 7/8 in threaded rod securely
  • Malleable iron construction for durability
  • Meets ANSI/MSS SP-69 and UL standards
  • Includes locknut for reliable installation

Specifications

ColorTransparent
BrandANVIL

Questions about this item

How much weight does the 1,365 lb load rating actually support when the clamp is installed on an H-beam?

The clamp is rated for 1,365 lb when mounted bottom-center on an H-beam up to 7 in wide with a 7/16 in bolt.

What does the ANSI/MSS SP-69 Type 30 standard limit for this beam clamp?

ANSI/MSS SP-69 Type 30 defines the design, dimensions and testing requirements for this malleable iron tong-style clamp.

Will the 2.38 in clamp length fit a 7/8 in threaded rod with the included locknut?

Yes, the 2.38 in tong-style clamp accepts 7/8 in threaded rod and ships with a locknut for secure attachment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.