We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil pipe clamp, carbon steel, plain finish, 7-5/8 in length

Anvil

Anvil 0500093596 Pipe Clamp 3-1/2 In 7-5/8 In L trap

SKU CH-PDTR-N5SFS MPN 0500093596

A 3-1/2 inch carbon-steel pipe clamp rated for 1040 lb at 650°F and 930 lb at 750°F, meeting UL, FM and federal specifications

  • TypeDrain Components
  • MaterialHAWA
  • Carbon steel construction handles 1040 lb loads at 650°F
  • Supports 930 lb at 750°F for hot piping systems
  • UL, ULC listed and FM approved for code compliance
  • Meets federal spec A-A-1192A and ANSI/MSS SP-69 standards
  • 7-5/8 in length fits 3-1/2 in pipe for secure suspension

Pipe Clamp for 3-1/2 Inch Piping

The Anvil 0500093596 is a carbon steel pipe clamp designed to suspend 3-1/2 inch pipe lines. It handles cold or hot lines where no insulation is required and carries UL, ULC and FM approvals. The plain finish unit meets Federal Specification A-A-1192A Type 4 and ANSI/MSS SP-69 standards.

Replaces Worn or Undersized Hangers

This clamp upgrades from lighter-duty hangers when a maximum load of 1040 lb at 650 Degrees F or 930 lb at 750 Degrees F is needed. The 7-5/8 inch length and 1/2 inch thread size fit existing trapeze or rod assemblies. The jump is worth it when current hardware lacks the listed temperature ratings or code compliance.

Suits Commercial and Industrial Pipe Runs

Installers working to WW-H-171-E Type 4 or MSS SP-58 Type 4 requirements will find this clamp appropriate. It is not for insulated lines, plastic piping or applications needing a different pipe diameter or thread specification. Buyers who need stainless steel construction or larger load capacities should look elsewhere.

Highlights

  • Carbon steel construction handles 1040 lb loads at 650°F
  • Supports 930 lb at 750°F for hot piping systems
  • UL, ULC listed and FM approved for code compliance
  • Meets federal spec A-A-1192A and ANSI/MSS SP-69 standards
  • 7-5/8 in length fits 3-1/2 in pipe for secure suspension

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500093596

Questions about this item

What pipe diameter does the 3-1/2 inch Anvil 0500093596 clamp fit?

The clamp is sized for a 3-1/2 inch pipe outside diameter and has an overall length of 7-5/8 inches.

How is the carbon steel clamp secured to the pipe and what common step is missed?

The 1/2 inch threaded rod is tightened around the pipe; the step often missed is torquing the nuts evenly so the clamp seats flat without distorting the pipe.

When should the clamp be inspected or replaced after installation on a hot line?

Inspect for corrosion or thread wear whenever the system cycles above 650 degrees Fahrenheit, as the rated load drops from 1040 pounds to 930 pounds at 750 degrees Fahrenheit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.