We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc-plated ductile iron beam clamp with locknut, C-clamp style

Anvil

Anvil 0500010236 Beam Clamp

SKU CH-3WK3-214EA

A wide-throat C-clamp beam hanger for 3/4 in threaded rod, ductile iron zinc-plated, 1,600 lb capacity, 60 in-lb install torque, UL listed to ANSI/MSS SP-69 and MSS SP-58 Type 19

  • ColorTransparent
  • Holds up to 1,600 lb on H-beams
  • Zinc-plated ductile iron resists corrosion
  • 3/4 in throat fits standard flanges
  • Meets ANSI/MSS SP-69 and UL standards
  • Includes locknut for secure rod attachment

Beam Clamp for ¾ in Threaded Rod

The Anvil 0500010236 is a wide-throat top beam clamp designed to suspend ¾ inch threaded rod from the bottom flange of an H-beam. It is intended for mechanical contractors and maintenance crews who need a secure overhead attachment point for piping or conduit systems.

Installation with Included Locknut

The clamp body is ductile iron with a zinc-plated finish and requires an installation torque of 60 in-lb. A locknut is supplied to prevent loosening under vibration. Over-tightening beyond the specified torque can strip threads or deform the clamp throat, reducing holding power.

Rated for 1,600 lb Load Capacity

The assembly supports a maximum load of 1,600 lb when mounted on a suitable H-beam with the throat fully engaged. It complies with ANSI/MSS SP-69, MSS SP-58, A-A-1192A, UL Listed and WW-H-171-E standards. It is not designed for side-loading, dynamic shock loads, or beam profiles other than H-beam.

Highlights

  • Holds up to 1,600 lb on H-beams
  • Zinc-plated ductile iron resists corrosion
  • 3/4 in throat fits standard flanges
  • Meets ANSI/MSS SP-69 and UL standards
  • Includes locknut for secure rod attachment

Specifications

ColorTransparent
BrandANVIL

Questions about this item

How do I verify the Anvil 0500010236 beam clamp is installed correctly?

Torque the clamp to 60 in-lb using a calibrated wrench and confirm the locknut is fully engaged against the 3/4 in threaded rod. The wide throat should seat flush on the H-beam bottom flange.

What comes with the Anvil 0500010236 beam clamp and what must I source separately?

The clamp includes the locknut. You must supply the 3/4 in threaded rod and any additional mounting hardware required for your specific H-beam application.

Which Anvil beam clamp version suits a 3/4 in rod on an H-beam with a 1,600 lb load?

The 0500010236 model is rated for 3/4 in threaded rod, H-beam mounting and a 1,600 lb load capacity, meeting ANSI/MSS SP-69, MSS SP-58 and UL Listed standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.