We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil malleable iron C-clamp beam hanger, plain finish

Anvil

Anvil 0500008032 Malleable Iron Beam Clamp 500 lb

SKU CH-XHSQ-T13T1

Malleable iron beam clamp with 500 lb capacity for 3/4 in threaded rod on H-beams

  • ColorTransparent
  • Supports 500 lb load capacity for heavy-duty hanging
  • Malleable iron construction resists cracking under stress
  • cUL, UL and FM approvals confirm code compliance
  • Meets ANSI/MSS SP-69 and MSS SP-58 Type 23 standards
  • Includes locknut for secure threaded rod attachment

Anvil Malleable Iron Beam Clamp

The Anvil 0500008032 is a malleable iron beam clamp designed to support threaded rod from the bottom flange of an H-beam. It accepts 3/4 in rod and includes a locknut for secure attachment. This clamp suits mechanical and fire-protection contractors who need a listed hanger for overhead piping or conduit runs. It is not for installers who require a top-mount or side-mount configuration or a different rod diameter.

Thermal noise and power draw

As a passive mechanical fastener the clamp generates no heat, produces no noise and draws no electrical power during normal use. Its holding capacity of 500 lb is maintained without active cooling or energy input. The component does not suit applications that demand adjustable spring tension or motorised positioning.

Load capacity and standards

The single specification that decides suitability is the 500 lb load capacity combined with compliance to ANSI/MSS SP-69, MSS SP-58, WW-H-171-E, A-A-1192A, UL, cUL and FM approvals. Projects requiring a higher rated capacity or a different standard must select another hanger.

Highlights

  • Supports 500 lb load capacity for heavy-duty hanging
  • Malleable iron construction resists cracking under stress
  • cUL, UL and FM approvals confirm code compliance
  • Meets ANSI/MSS SP-69 and MSS SP-58 Type 23 standards
  • Includes locknut for secure threaded rod attachment

Specifications

ColorTransparent
BrandANVIL

Questions about this item

How do you tighten the Anvil 0500008032 beam clamp on an H-beam and what torque value should you use?

Tighten the clamp onto the bottom flange of the H-beam until the locknut is snug, then apply 60 in-lb of installation torque to secure the 3/4 in threaded rod.

What part of the Anvil 0500008032 clamp will need checking or replacement after long service?

Inspect the locknut and malleable iron body for corrosion or thread damage; replace the locknut if it no longer holds the rod at 60 in-lb torque.

What is the maximum steady load the Anvil 0500008032 clamp can carry before it reaches its rated limit?

The clamp is rated for a 500 lb load capacity; sustained loading at or above this value reaches the design limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.