We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel 90 degree elbow socket weld fitting class 3000

Anvil

Anvil 0362001208 Black Forged Steel 90 Degree Elbow Class 3000 coupling

SKU CH-5C9D-3S520

Connects 1-inch pipes at a 90-degree angle using socket-weld forged steel rated Class 3000 for 2000 psi at 150 °F and 300 psi saturated steam at 550 °F

  • Forged steel handles 2000 psi at 150 °F
  • Class 3000 rating supports 300 psi saturated steam at 550 °F
  • Socket-weld connection creates leak-tight joints without threading
  • ASME B16.11 and ASTM A106 compliance ensures dimensional consistency
  • Operates reliably from -20 °F to 550 °F

1-inch Socket-Weld Elbow

This Anvil 90-degree elbow is forged from black steel for Class 3000 piping systems. It suits installers who need a compact directional change on one-inch pipe using socket-weld joints. The fitting meets ASME B16.11 and ASTM A106 standards for pressure service.

Pressure headroom to 2000 psi

Rated for 2000 psi at 150 degrees F and 300 psi saturated steam at 550 degrees F, the elbow handles typical high-pressure hydraulic and steam lines. It runs out above those pressures or beyond the 550-degree F limit, so it is not for supercritical steam or cryogenic service.

Socket-weld connection only

The fitting accepts one-inch pipe with a socket-weld end prep and provides two bolt holes for alignment. It will not join butt-weld, threaded or flanged pipe without a different fitting.

Highlights

  • Forged steel handles 2000 psi at 150 °F
  • Class 3000 rating supports 300 psi saturated steam at 550 °F
  • Socket-weld connection creates leak-tight joints without threading
  • ASME B16.11 and ASTM A106 compliance ensures dimensional consistency
  • Operates reliably from -20 °F to 550 °F

Specifications

BrandANVIL

Questions about this item

Will this Class 3000 forged steel elbow handle the same 2000 psi at 150 °F as my existing ASME B16.11 socket-weld piping?

Yes, it is rated for 2000 psi at 150 °F and meets ASME B16.11, so it matches the pressure class of your current Class 3000 socket-weld system.

How can I verify the elbow is seated correctly after socket welding?

After welding, check that the pipe is fully inserted into both sockets and run a hydrostatic test at your system design pressure; no leakage confirms a sound joint.

Does the box include any gaskets, sealant or welding consumables, or just the elbow?

Only the 90-degree forged steel elbow is supplied; socket-weld consumables, flux, sealant or gaskets must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.