We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel cross fitting with four threaded ports

Anvil

Anvil 0361130206 Black Forged Steel Cross Class 3000 coupling

SKU CH-4SX6-JMEBG

Black forged steel cross fitting with four FNPT connections, rated Class 3000 for 1500 psi at 150 °F

  • Forged steel construction handles 1500 psi at 150 °F
  • Class 3000 rating supports 300 psi saturated steam at 550 °F
  • Four FNPT ports enable multi-directional pipe connections
  • Meets ASME B16.11 and ASTM A106 standards for reliability
  • Operates across a -20 to 550 °F temperature range

Anvil Class 3000 forged steel cross

This Anvil cross fitting is manufactured from black forged steel to Class 3000 specifications. It provides four female NPT openings for connecting pipe sections in plumbing and industrial systems. The fitting meets ASME B 16.11 and ASTM A106 standards for pressure service.

Suits systems needing four-way NPT junctions

Installers requiring a 1-1/4 inch FNPT cross rated for 1500 psi at 150 Degrees F will find this part appropriate. It is not for systems that demand socket-weld or butt-weld connections instead of threaded ends. Buyers needing a different pipe size or a lower pressure class should select another fitting.

Pressure rating 1500 psi at 150 Degrees F

The maximum working pressure is 1500 psi at 150 Degrees F, with a saturated steam rating of 300 psi at 550 Degrees F. The operating temperature range extends from -20 Degrees to 550 Degrees F. This pressure and temperature envelope is the primary factor in determining whether the cross matches the design requirements of the piping system.

Highlights

  • Forged steel construction handles 1500 psi at 150 °F
  • Class 3000 rating supports 300 psi saturated steam at 550 °F
  • Four FNPT ports enable multi-directional pipe connections
  • Meets ASME B16.11 and ASTM A106 standards for reliability
  • Operates across a -20 to 550 °F temperature range

Specifications

BrandANVIL

Questions about this item

What size female NPT threads does the 1-1/4 in cross use?

Each of the four openings is machined to 1-1/4 in FNPT per ASME B1.20.1, so standard 1-1/4 in NPT male pipe threads will engage fully.

How do I seal the threads when installing this forged steel cross?

Apply PTFE tape or pipe-thread sealant to the male threads only, then tighten two turns past hand-tight; over-tightening can crack the Class 3000 fitting.

When should I plan to replace the cross in a steam line?

Inspect annually; replace if you see corrosion, leakage, or if the system exceeds the 300 psi saturated-steam rating at 550 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.