We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel reducing tee with three female NPT openings, two larger and one smaller

Anvil

Anvil 0361123508 1" x 1" x 3/4" FNPT Reducing Tee coupling

SKU CH-JDDR-MFCQP

Connects three pipes with female NPT threads, reducing from two 1 in. ports to one 3/4 in. port, rated 2000 psi at 150 °F

  • TypePlumbing & Pipe Fittings
  • Connects three pipe sizes with female NPT threads
  • Forged black steel rated for Class 3000 service
  • Withstands 2000 psi at 150 °F operating pressure
  • Handles saturated steam at 300 psi and 550 °F
  • Meets ASME B16.11 and ASTM A106 standards

Anvil 1" FNPT Reducing Tee

The Anvil 0361123508 is a forged-steel reducing tee with FNPT threads measuring 1 in x 1 in x 3/4 in. It conforms to ASME B16.11 and ASTM A106 standards for Class 3000 fittings. The body is rated for 2000 psi at 150 °F and 300 psi saturated steam at 550 °F. Operating temperature range spans -20 °F to 550 °F.

Suits high-pressure steam

Installers requiring a Class 3000 forged fitting with female NPT ports and a straight-through run plus a reduced outlet will find this part matches the spec. Systems that demand a different thread standard, a larger branch size, or a lower pressure class should select an alternative fitting.

The 2000 psi at 150 °F pressure rating decides fit

This single figure confirms whether the tee meets the design pressure of the piping system. If the service pressure exceeds 2000 psi at the operating temperature, the fitting is not suitable and a higher-class component must be used.

Highlights

  • Connects three pipe sizes with female NPT threads
  • Forged black steel rated for Class 3000 service
  • Withstands 2000 psi at 150 °F operating pressure
  • Handles saturated steam at 300 psi and 550 °F
  • Meets ASME B16.11 and ASTM A106 standards

Specifications

TypePlumbing & Pipe Fittings
BrandAnvil

Questions about this item

What comes in the box and do I need to buy any pipe sealant or adapters separately?

The box contains only the black forged steel reducing tee; thread sealant or tape and any pipe nipples or adapters are not included and must be purchased separately.

How do I decide between the 1 in x 1 in x 3/4 in FNPT tee and other sizes in the Anvil Class 3000 range?

Choose this tee when your system has two 1 in female NPT ports and one 3/4 in female NPT branch, all rated for 2000 psi at 150 °F.

What does the 2000 psi @ 150 °F rating mean once the tee is installed in a steam line?

It means the fitting can handle up to 2000 psi at 150 °F and up to 300 psi saturated steam at 550 °F within the -20 °F to 550 °F temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.