We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel 45 degree elbow fitting with FNPT ends

Anvil

Anvil 0361111602 Black Forged Steel 45 Degree Elbow Class 3000 2 in coupling

SKU CH-F204-QYX5T

Forged-steel 45-degree elbow with FNPT ends rated for 1500 psi at 150 °F and 300 psi saturated steam at 550 °F

  • Forged steel construction handles 1500 psi working pressure
  • 45-degree flow change suits tight piping layouts
  • Class 3000 rating meets ASME B16.11 and ASTM A106 standards
  • FNPT threads seal to B1.20.1 for leak-resistant joints
  • Operates from -20 °F to 550 °F including 300 psi saturated steam

Anvil 2 in 45° forged-steel elbow

The Anvil 0361111602 is a Class 3000 black forged-steel elbow that turns a 2 in FNPT pipe run by 45 degrees. It meets ASME B16.11 and ASTM A106 standards for high-pressure piping systems.

Threaded FNPT installation notes

The fitting uses female NPT threads on both ports, so it screws onto male pipe ends with standard thread sealant. Over-tightening can crack the forged body, and debris in the threads often causes leaks at 1500 psi service pressure.

Class 3000 pressure and temperature limits

Rated for 1500 psi at 150 °F and 300 psi saturated steam at 550 °F, with a continuous range from -20 °F to 550 °F. It is not suitable for pressures above Class 3000 or for media exceeding the stated temperature ceiling.

Highlights

  • Forged steel construction handles 1500 psi working pressure
  • 45-degree flow change suits tight piping layouts
  • Class 3000 rating meets ASME B16.11 and ASTM A106 standards
  • FNPT threads seal to B1.20.1 for leak-resistant joints
  • Operates from -20 °F to 550 °F including 300 psi saturated steam

Specifications

BrandANVIL

Questions about this item

How can I confirm the 45 degree elbow is sealing correctly after installation?

Pressure-test the joint up to 1500 psi at 150 °F or 300 psi saturated steam at 550 °F and check for leaks at the two FNPT connections.

What comes with the fitting and what must I supply myself?

The box contains the single black forged steel 45 degree elbow; you must provide 2 in pipe, thread sealant or tape, and wrenches for the FNPT threads.

Which class rating should I select for a 2 in line rated to 1500 psi?

Choose the Class 3000 version — it matches the 1500 psi at 150 °F and 300 psi saturated steam at 550 °F limits shown for this 2 in elbow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.