We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel 45 degree elbow fitting with two threaded ends

Anvil

Anvil 0361111404 black forged steel 45 degree elbow class 3000 coupling

SKU CH-E603-GW1CH

A 45-degree forged steel elbow rated Class 3000 for 1500 psi at 150 °F and 300 psi saturated steam at 550 °F

  • Forged steel construction resists corrosion and high pressure
  • 45-degree angle enables smooth directional changes in piping systems
  • Class 3000 rating supports 1500 psi at 150 °F and 300 psi saturated steam at 550 °F
  • FNPT threaded connections comply with ASME B16.11 and ASTM A106 standards
  • Operating temperature range from -20 °F to 550 °F suits steam and fluid applications

1-1/2 in FNPT forged steel elbow

This Anvil 0361111404 elbow provides a 45 degree change of direction in a piping system. It is manufactured from black forged steel to Class 3000 and carries an FNPT threaded connection on each end. The fitting meets ASME B 16.11, ASTM A106 and B 1.20.1 standards for pressure service.

Installers working with 1-1/2 in FNPT pipe

The fitting suits systems operating up to 1500 psi at 150 degrees F and saturated steam up to 300 psi at 550 degrees F. Its temperature range spans -20 to 550 degrees F. Installers needing a different thread type, a larger bore, or a pressure class above 3000 must select another fitting.

Class 3000 pressure rating at 150 degrees F

The forged steel body is rated for 1500 psi at 150 degrees F and 300 psi saturated steam at 550 degrees F. This single rating determines whether the elbow matches the design pressure of the intended installation.

Highlights

  • Forged steel construction resists corrosion and high pressure
  • 45-degree angle enables smooth directional changes in piping systems
  • Class 3000 rating supports 1500 psi at 150 °F and 300 psi saturated steam at 550 °F
  • FNPT threaded connections comply with ASME B16.11 and ASTM A106 standards
  • Operating temperature range from -20 °F to 550 °F suits steam and fluid applications

Specifications

BrandANVIL

Questions about this item

What pipe size and connection type does the Anvil 0361111404 elbow require to fit my existing piping?

This fitting accepts 1-1/2 inch pipe with FNPT threads on both ends, matching the stated pipe size and connection type in the specifications.

Can the Class 3000 forged steel elbow handle the same pressure and temperature range as my older Class 150 fittings?

No, it is rated for 1500 psi at 150 Degrees F and 300 psi saturated steam at 550 Degrees F, which exceeds typical Class 150 limits across the -20 to 550 Degrees F range.

How can I verify the Anvil 0361111404 elbow meets code after installation?

Confirm the body carries the ASME B 16.11 and ASTM A106 markings, check thread engagement per B 1.20.1, and pressure-test to 1500 psi at 150 Degrees F without leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.