We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, threaded both ends, silver-grey finish

Anvil

Anvil 0334535408 1-1/2" MNPT x 6" TBE Galvanized Steel Pipe Nipple Sch 40 Trap

SKU CH-BVSG-VB6EN MPN 0334535408

Galvanised steel pipe nipple with 1-1/2" male NPT threads and 6" overall length for air, gas, oil, steam and non-potable water at 150 psi

  • TypeDrain Components
  • 1-1/2" MNPT threaded end connects directly to fittings
  • 6" overall length suits tight plumbing runs
  • Schedule 40 wall handles 150 psi at 150 °F
  • Galvanized steel resists corrosion in air, gas, oil and steam
  • Made in USA from Grade B welded steel

Anvil 1-1/2" Galvanized Steel Pipe Nipple

This Anvil 0334535408 pipe nipple connects air, gas, non-potable water, oil or steam lines. The 1-1/2 inch male NPT threads fit Schedule 40 fittings and the six inch overall length suits standard piping runs. Welded Grade B steel construction provides strength for industrial and commercial plumbing installations. The black anodized finish resists corrosion in harsh environments.

Installers needing Schedule 40 threaded connections

This nipple suits plumbers and maintenance crews joining Schedule 40 steel pipe in non-potable systems. It is not intended for potable water lines or for applications requiring Schedule 80 wall thickness. Buyers who need a different length, a female threaded end or a different material should select another fitting.

150 psi maximum operating pressure

The fitting is rated for 150 psi at 150 degrees Fahrenheit. This pressure limit determines whether the nipple can handle the intended service conditions. Exceeding this rating risks joint failure and leaks in the piping system.

Highlights

  • 1-1/2" MNPT threaded end connects directly to fittings
  • 6" overall length suits tight plumbing runs
  • Schedule 40 wall handles 150 psi at 150 °F
  • Galvanized steel resists corrosion in air, gas, oil and steam
  • Made in USA from Grade B welded steel

Specifications

TypeDrain Components
BrandAnvil
Model0334535408

Questions about this item

What comes in the box and do I need any extra fittings for the 1-1/2" MNPT threads?

The box contains the single 6" galvanized steel nipple with male NPT threads on both ends. You will need compatible female-threaded fittings, pipe sealant or tape, and any valves or traps required by your piping layout.

Should I choose the Schedule 40 or Schedule 80 version for a 150 psi steam line?

This nipple is Schedule 40 wall thickness and rated 150 psi at 150 °F, matching the stated maximum operating pressure. Schedule 80 would be a heavier wall; select it only if your design calls for a higher pressure class.

How does the 1-1/2" nominal size and 6" length affect flow in a welded steel system?

The 1-1/2" nominal bore and 1 29/32" outside diameter give a standard Schedule 40 flow area, while the 6" overall length adds minimal friction loss in typical air, gas, oil or non-potable water circuits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.