We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female threaded openings

Anvil

Anvil 0310038609 Malleable Iron Reducing Tee 3/4 in x 3/4 in x 1/4 in Class 150

SKU CH-GAP9-5XXM9 MPN 0310038609

Malleable iron reducing tee connects three pipe sections with FNPT threads, rated for 300 psi at 150 °F and 150 psi saturated steam at 350 °F

  • TypeDrain Components
  • MaterialMalleable Iron
  • Malleable iron construction handles 300 psi at 150 °F
  • Class 150 rating supports 150 psi saturated steam at 350 °F
  • Operates reliably from -20 °F to 350 °F
  • ASME B16.3 compliance ensures dimensional accuracy
  • UL and FM listings confirm fire-protection suitability

Anvil Malleable Iron Reducing Tee

The Anvil 0310038609 is a Class 150 pipe fitting made from malleable iron. It connects three pipes at a tee junction with a 3/4 in x 3/4 in x 1/4 in reducing configuration. This component suits plumbing and drain systems requiring a durable branch connection. It meets ASME B 16.3 standards for dimensional accuracy.

FNPT threaded connections and iron construction

Female National Pipe Taper threads on all three openings allow direct assembly with compatible male-threaded pipe without soldering or welding. The malleable iron body resists mechanical shock and vibration better than cast iron. Class 150 rating indicates the fitting’s standard wall thickness for general service. UL and FM approvals confirm compliance with safety testing requirements.

Pressure and temperature operating envelope

Maximum working pressure is 300 psi at 150 degrees F for non-shock cold water, oil, or gas service. Saturated steam pressure is limited to 150 psi at 350 degrees F. The fitting operates continuously from -20 degrees to 350 degrees F. Systems exceeding these pressure or temperature limits require a higher-class fitting.

Highlights

  • Malleable iron construction handles 300 psi at 150 °F
  • Class 150 rating supports 150 psi saturated steam at 350 °F
  • Operates reliably from -20 °F to 350 °F
  • ASME B16.3 compliance ensures dimensional accuracy
  • UL and FM listings confirm fire-protection suitability

Specifications

BrandAnvil
Model0310038609
TypeDrain Components
MaterialMalleable Iron

Questions about this item

What is the maximum pressure rating for the Anvil 0310038609 reducing tee at 150 degrees Fahrenheit?

The Anvil 0310038609 reducing tee is rated for a maximum pressure of 300 psi at 150 degrees Fahrenheit, meeting Class 150 specifications.

What thread type is required to connect pipes to this malleable iron reducing tee?

This reducing tee uses FNPT (Female National Pipe Thread) connections, so male NPT threaded pipes or fittings are required for a proper seal.

How should sealant be applied when installing this Class 150 reducing tee to avoid leaks?

Apply thread sealant or tape only to the male pipe threads, not inside the female FNPT ports of the tee, to prevent excess material from contaminating the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.