We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90-degree street elbow with threaded ends

Anvil

Anvil 0310017009 1-1/2" Malleable Iron 90 Degree Street Elbow trap

SKU CH-XR4G-EMPCV MPN 0310017009

A 90-degree malleable-iron street elbow with FNPT x MNPT connections, rated to 300 psi at 150 °F and 150 psi saturated steam at 350 °F

  • TypeDrain Components
  • Directs flow at a right angle with 90-degree street elbow design
  • Connects male and female NPT threads using FNPT x MNPT configuration
  • Withstands up to 300 psi at 150 °F with Class 150 malleable iron
  • Handles saturated steam at 150 psi and 350 °F per ASME B 16.3
  • Operates reliably from -20 °F to 350 °F across heating and drainage systems

Anvil 1-1/2" Malleable Iron Street Elbow

The Anvil 0310017009 is a 90-degree street elbow made from malleable iron for Class 150 piping systems. It connects a 1-1/2 inch female NPT thread to a male NPT thread in drain and trap installations. The fitting meets ASME B 16.3 standards and carries UL and FM approvals for pressure service.

Installation uses standard NPT threading practice

Apply pipe-thread sealant or tape to the male threads before engaging the female end. Tighten to the recommended turns-past-hand-tight for 1-1/2 inch NPT to avoid cracking the malleable iron. Over-tightening is the most common cause of leaks or fitting damage in this size.

Class 150 malleable iron defines the pressure

The fitting is rated for 300 psi at 150 degrees F and 150 psi saturated steam at 350 degrees F. Operating temperature range spans -20 to 350 degrees F. These limits restrict use to low-pressure steam, water, oil, air or gas lines within the stated bounds.

Highlights

  • Directs flow at a right angle with 90-degree street elbow design
  • Connects male and female NPT threads using FNPT x MNPT configuration
  • Withstands up to 300 psi at 150 °F with Class 150 malleable iron
  • Handles saturated steam at 150 psi and 350 °F per ASME B 16.3
  • Operates reliably from -20 °F to 350 °F across heating and drainage systems

Specifications

TypeDrain Components
BrandAnvil
Model0310017009

Questions about this item

How can I confirm the 90 degree street elbow is seated correctly after installation?

Check that the FNPT and MNPT threads engage fully without gaps and that the joint holds 300 psi at 150 °F without leakage.

What comes with the Anvil 0310017009 and what must be purchased separately?

The box contains the 1-1/2" malleable iron 90 degree street elbow only; pipe sealant or tape and matching pipe lengths are not included.

Which class rating should I select for a 150 psi saturated steam line at 350 °F?

Choose the Class 150 version listed, rated for 150 psi saturated steam at 350 °F per ASME B16.3.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.