We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron concentric reducer coupling with female NPT ends

Anvil

Anvil 0300150208 Concentric Reducer Trap 1-1/2" x 3/4

SKU CH-MYD7-RYH1M MPN 0300150208

Concentric reducer coupling in cast iron Class 125 with NPT female threads for Schedule 40 pipe, rated 175 psi at 150°F

  • TypeDrain Components
  • Concentric design keeps flow centred through the 1-1/2" to 3/4" reduction
  • Class 125 cast iron withstands 175 psi at 150 °F
  • Female NPT threads on both ends allow direct pipe connection
  • Schedule 40 rating suits standard drainage installations

Anvil Concentric Reducer 1-1/2" x 3/4

This Anvil concentric reducer coupling joins a 1-1/2 inch female NPT pipe to a 3/4 inch female NPT pipe in drainage installations. The black cast iron fitting is rated for Schedule 40 piping and carries a Class 125 pressure class for standard plumbing systems.

Thermals noise and power draw in normal use

As a passive cast iron fitting it produces no noise and draws no power during operation. The material handles fluid temperatures up to 150 degrees Fahrenheit at a maximum operating pressure of 175 psi without thermal expansion concerns.

Highlights

  • Concentric design keeps flow centred through the 1-1/2" to 3/4" reduction
  • Class 125 cast iron withstands 175 psi at 150 °F
  • Female NPT threads on both ends allow direct pipe connection
  • Schedule 40 rating suits standard drainage installations

Specifications

TypeDrain Components
BrandAnvil
Model0300150208

Questions about this item

How do I install the Anvil 0300150208 concentric reducer on Schedule 40 pipe without cross-threading the NPT threads?

Apply PTFE tape or pipe sealant to the male threads only, hand-tighten the cast iron coupling, then turn one to two full turns with a strap wrench to avoid cracking the Class 125 fitting.

What maintenance will the cast iron reducer trap need after installation?

Inspect the joint annually for rust seepage or mineral build-up; the black cast iron body handles 175 psi at 150 °F but the threads may need re-sealing if a slow leak develops over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.