We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil 0300030301 cast iron 22.5 degree elbow with female NPT threads

Anvil

Anvil 0300030301 22.5° Cast Iron Elbow 1-1/2" NPT Class 125 Sch 40 175 psi

SKU CH-5E7F-STVFF MPN 0300030301

A 22.5° cast-iron elbow joins two 1-1/2" NPT female threads at Class 125 Schedule 40 rated for 175 psi at 150°F

  • TypeDrain Components
  • MaterialHAWA
  • Directs flow at a precise 22.5° angle
  • Cast iron construction handles 175 psi at 150°F
  • Class 125 rating suits Schedule 40 piping
  • 1-1/2" NPT female threads on both ends
  • Anvil 0300030301 model ensures consistent fit

1-1/2" Cast Iron 22.5° Elbow

This Anvil drain component connects two 1-1/2 inch female NPT pipes at a 22.5 degree angle. The cast iron construction meets Class 125 specifications for Schedule 40 piping systems. It is rated for a maximum operating pressure of 175 psi at 150 degrees Fahrenheit.

Suited for low-pressure directional changes

Plumbers and maintenance teams use this fitting to create gentle offsets in drainage or low-pressure fluid lines. The 22.5 degree sweep reduces turbulence compared to sharper bends. It is not designed for high-pressure hydraulic circuits or applications exceeding the 175 psi rating.

Class 125 Schedule 40 compatibility

The fitting matches Class 125 dimensions and Schedule 40 wall thickness standards. Verify that the existing piping system uses the same class and schedule before installation to ensure a proper seal and pressure integrity.

Highlights

  • Directs flow at a precise 22.5° angle
  • Cast iron construction handles 175 psi at 150°F
  • Class 125 rating suits Schedule 40 piping
  • 1-1/2" NPT female threads on both ends
  • Anvil 0300030301 model ensures consistent fit

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0300030301

Questions about this item

Will the 1-1/2" NPT female threads on this 22.5° elbow match my Schedule 40 pipe?

Yes. The elbow is made for Schedule 40 pipe and has 1-1/2" NPT female threads on both ends to screw directly onto male pipe threads.

Do I need special tools or sealant to install this cast iron elbow correctly?

Use a pipe wrench on the cast iron body and apply PTFE tape or pipe dope to the male threads before tightening. The step often missed is cleaning both thread sets thoroughly first.

How often should I inspect or replace a Class 125 cast iron drain elbow in service?

Inspect yearly for external rust, joint seepage or internal scaling. Replace if the wall shows pitting, cracks or if the 175 psi at 150 °F rating can no longer be maintained.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.