We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of orange nitrile disposable gloves, textured fingertips, beaded cuffs

ANSELL

ANSELL N481 N48 Disposable Nitrile Gloves 5.1 mil Palm Orange personal protective equipment

SKU CH-1WST-3XD4E

Disposable nitrile exam gloves with 5.1 mil palm, 7.9 mil fingers, 3.9 mil cuff, AQL 1.5, powder-free, latex-free, silicone-free, anti-static, 10 1/2 in length.

  • Medical-grade protection with AQL 1.5 quality assurance
  • Powder-free nitrile eliminates latex allergy risk
  • Anti-static property safeguards sensitive electronics
  • 1 mil palm thickness balances durability and dexterity
  • FDA 510K and NFPA 1999 certified for regulated environments

Product Identity

Ansell N481 N48 disposable nitrile gloves deliver 5.1 mil palm thickness and 7.9 mil finger thickness for general-purpose and medical exam use. The orange, powder-free, latex-free construction includes a beaded cuff and anti-static properties. They meet AQL 1.5, FDA 510K, NFPA 1999 and US 21 CFR 170-199 standards.

Practical Limits

The gloves are single-use only and must be discarded after each task or contamination event. They provide splash resistance but are not rated for prolonged chemical immersion or heavy mechanical abrasion. Anti-static performance applies to the glove surface and does not replace dedicated ESD grounding systems. Silicone-free formulation avoids residue in paint or electronics assembly.

Deciding Specification

Palm thickness of 5.1 mil determines whether the glove balances tactile sensitivity with barrier durability for your application. Thinner gloves increase dexterity but reduce puncture resistance; thicker gloves extend wear time but limit fine motor control. Buyers who need heavier chemical protection or reusable gloves cannot use this product.

Highlights

  • Medical-grade protection with AQL 1.5 quality assurance
  • Powder-free nitrile eliminates latex allergy risk
  • Anti-static property safeguards sensitive electronics
  • 1 mil palm thickness balances durability and dexterity
  • FDA 510K and NFPA 1999 certified for regulated environments

Specifications

BrandMICROFLEX

Questions about this item

Which palm thickness should I choose, 5.1 mil or the 5.00 to 5.99 mil range?

The glove has a measured palm thickness of 5.1 mil, which sits inside the 5.00 to 5.99 mil range shown in the listing title.

What does the 1.5 AQL figure mean when I am wearing the gloves?

An AQL of 1.5 indicates a low defect rate for pinholes, so the gloves meet medical-grade barrier expectations during use.

Which standards does the glove meet, and what do they cap in practice?

The gloves comply with US FDA 21 CFR 170-199 and FDA 510K for medical use, and NFPA 1999 for emergency medical operations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.