Analog Technologies, Inc.
Analog Technologies, Inc. AHV12V8KV1MAW Industrial Power Supply 12V 8kV 1mA
Converts 12 V input to adjustable 0 to -8 kV output at up to 1 mA for industrial high-voltage applications
- TypeLinear Power Supplies
- Voltage-8KV
- Amps1mA
- Delivers stable 0 to -8 kV output for sensitive industrial equipment
- Accepts 12 V input with 190 to 950 mA current range for flexible integration
- Precision 5 V ± 0.05 V reference voltage ensures accurate control
- Electronic shutdown control adds operational safety during faults
- Metal enclosure provides zero EMI and effective heat sinking for reliability
Industrial high-voltage DC-DC module
The Analog Technologies AHV12V8KV1MAW converts a 12 V input into an adjustable negative output up to 8 kV at 1 mA. It is built for engineers and technicians who need a compact, linear high-voltage source for laboratory or production equipment.
Output range and current headroom
The module delivers 0 to -8 kV controlled by a 0 to 5 V signal while drawing 190 to 950 mA from the 12 V rail. Maximum load current is 1 mA, so the supply suits low-current applications such as electrophoresis or capillary systems but cannot drive higher-power loads.
Integration requirements and benefits
A stable 12 V ± 1 V source and a 0 to 5 V control voltage are all that are needed for operation. The metal enclosure provides shielding and heat sinking with zero EMI, freeing the designer from adding external filtering or bulky cooling in X-ray, sputtering or semiconductor tools.
Highlights
- Delivers stable 0 to -8 kV output for sensitive industrial equipment
- Accepts 12 V input with 190 to 950 mA current range for flexible integration
- Precision 5 V ± 0.05 V reference voltage ensures accurate control
- Electronic shutdown control adds operational safety during faults
- Metal enclosure provides zero EMI and effective heat sinking for reliability
Specifications
| Type | Linear Power Supplies |
|---|---|
| Voltage | -8KV |
| Amps | 1mA |
Questions about this item
Will the 12V input work with my existing 12V rail that sits within ±1V?
The module accepts 12V ± 1V, so a rail staying inside that window will power it correctly.
How can I verify the output is tracking the 0–5V control signal after installation?
Measure the high-voltage output; it should scale from 0 to -8kV as the control voltage moves from 0 to 5V.
Does the package include the metal enclosure and shutdown control wiring, or must I source them separately?
The metal enclosure is integral for EMI shielding and heat sinking; the shutdown control is built in, so no extra parts are required for basic operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
