Ampco
Ampco WO-1-5/16X1-1/2 Double Open-End Wrench
Double open-end wrench in aluminium bronze, non-sparking, 14-inch overall length, 15-degree offset heads
- Non-sparking aluminium-bronze alloy prevents ignition in hazardous areas
- Double open-end design fits 1-5/16 in and 1-1/2 in fasteners
- 15-degree offset heads improve access in tight spaces
- One-piece construction delivers strength without welded joints
- 14 3/8 in overall length provides leverage for heavy-duty tasks
Double-End Wrench for Hazardous Areas
The Ampco WO-1-5/16X1-1/2 is a non-sparking open-end wrench made from aluminium bronze. It suits maintenance crews working where flammable vapours or dust make steel tools unsafe. The double-ended head provides two SAE sizes in one piece.
Sustained Use in Corrosive Settings
Aluminium bronze resists corrosion and will not produce sparks during prolonged turning force. The 15-degree offset keeps knuckles clear of hot or sharp surfaces during repeated cycles. No insulation is present, so electrical live-work rules still apply.
Simple Fit With Clearance Limits
The one-piece construction needs no assembly; each end slips onto the fastener directly. The 14-inch overall length demands swing room, so tight pipe runs may block full rotation. Rounded jaws reduce marring but can slip on heavily rounded nuts.
Highlights
- Non-sparking aluminium-bronze alloy prevents ignition in hazardous areas
- Double open-end design fits 1-5/16 in and 1-1/2 in fasteners
- 15-degree offset heads improve access in tight spaces
- One-piece construction delivers strength without welded joints
- 14 3/8 in overall length provides leverage for heavy-duty tasks
Specifications
| Brand | AMPCO SAFETY TOOLS |
|---|
Questions about this item
Does the 14 3/8 in length make the wrench heavy or tiring during all-day use?
The 14 3/8 in overall length provides leverage while the aluminium-bronze alloy keeps weight lower than comparable steel wrenches, reducing fatigue during extended work.
What fasteners or fittings must I already have to use the 1-5/16 in and 1-1/2 in openings?
You need SAE hex nuts or bolt heads measuring exactly 1-5/16 in and 1-1/2 in across the flats; the wrench will not fit metric or other sizes.
Will the 15-degree offset heads clear the same tight spaces as my older 15-degree steel wrenches?
Yes, both ends share the same 15-degree angle, so clearance in confined areas matches that of traditional 15-degree open-end wrenches you may already own.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
