Ampco
Ampco W-675 Combination Wrench SAE 1-5/16in 17in 15°
Aluminium-bronze combination wrench with 15° offset heads fits SAE 1-5/16in fasteners and measures 17in overall
- TypeCombination, Open & Box End Wrenches
- Aluminium-bronze nickel resists sparking for hazardous areas
- 15° offset clears obstacles in tight engine bays
- 17 in handle gives extra leverage on stubborn fasteners
- SAE 1-5/16 in opening fits large industrial bolts
- Combination head offers open and box ends in one tool
Ampco W-675 Combination Wrench SAE 1-5/16in
This Ampco W-675 combination wrench serves technicians who need a non-sparking, non-magnetic hand tool for hazardous environments. The aluminum bronze nickel construction resists corrosion and prevents ignition risk where flammable vapours or dust are present. Its SAE 1-5/16in opening fits large fasteners common in heavy equipment and marine maintenance. The 17in overall length provides leverage for stubborn bolts without requiring a cheater bar.
Suits maintenance crews in oil.
Workers who need a lightweight wrench for general assembly may prefer a standard steel tool instead. The specialised alloy adds cost and weight that are unnecessary outside classified areas. Buyers who want a ratcheting mechanism or a flexible head should look at a different design because this wrench has a fixed 15 degree offset on both ends. It is not intended for high-speed production lines where rapid socket changes are required.
Aluminium bronze nickel handles sustained torque
Under continuous load the material work-hardens slightly, maintaining grip on the fastener flats rather than rounding them. The 15 degree head offset allows a full swing in confined spaces while keeping knuckles clear of hot or sharp surfaces. Heat dissipates through the solid bar so the handle stays cooler during prolonged tightening cycles. The rounded box-end geometry distributes stress evenly across the nut corners.
Highlights
- Aluminium-bronze nickel resists sparking for hazardous areas
- 15° offset clears obstacles in tight engine bays
- 17 in handle gives extra leverage on stubborn fasteners
- SAE 1-5/16 in opening fits large industrial bolts
- Combination head offers open and box ends in one tool
Specifications
| Brand | AMPCO |
|---|---|
| Type | Combination, Open & Box End Wrenches |
Questions about this item
Does the 17 inch overall length match the reach of my existing 1 5/16 inch combination wrenches?
Yes, this wrench has an overall length of 17 inches which is a standard dimension for this head size, so it will provide the same reach as other wrenches of this specification.
Will the 15 degree head offset angle work the same way as the offset on my current SAE combination wrenches?
Yes, the 15 degree offset angle is a standard industry specification that provides identical knuckle clearance and fastener engagement geometry as other SAE combination wrenches with the same offset.
How can I verify the aluminum bronze nickel construction is correct after receiving the W-675?
The wrench will have a distinctive natural non-magnetic finish characteristic of aluminum bronze nickel alloy, and the head will be clearly marked with the 1 5/16 inch size and AMPCO branding for verification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
