Ampco
Ampco 1508 Combination Wrench SAE 2in
Non-sparking combination wrench with open and box ends, 22 3/4 in overall length and 15-degree offset
- TypeCombination, Open & Box End Wrenches
- Non-sparking safety for hazardous environments
- 2 in SAE size fits large industrial fasteners
- 22 3/4 in length provides high torque leverage
- 15 degree offset clears obstructions easily
- Aluminium bronze nickel construction resists corrosion
Ampco 1508 Combination Wrench SAE 2in
The Ampco 1508 is a non-sparking combination wrench made from aluminum bronze nickel for use in hazardous environments. Its open and box ends share a 2in SAE head size and a 15 degree offset angle. The overall length measures 22 3/4 inches to provide leverage on large fasteners. It suits maintenance crews in oil, gas or chemical plants where ferrous tools are prohibited.
Replaces standard steel wrenches in explosive
Standard steel wrenches can create ignition sources when striking rusted or corroded hardware. This aluminum bronze nickel tool eliminates that spark risk while fitting the same 2in SAE fasteners. The upgrade is justified whenever safety regulations require non-sparking, non-magnetic hand tools for confined-space or flammable-vapour work zones.
Limited to 2in SAE fasteners and manual torque
The fixed 2in opening means the wrench cannot address smaller or metric bolt heads without additional sizes. The 15 degree offset and rounded box end restrict access on deeply recessed or obstructed fasteners. Applied torque is limited by operator strength and the material's lower hardness compared with alloy steel.
Highlights
- Non-sparking safety for hazardous environments
- 2 in SAE size fits large industrial fasteners
- 22 3/4 in length provides high torque leverage
- 15 degree offset clears obstructions easily
- Aluminium bronze nickel construction resists corrosion
Specifications
| Brand | AMPCO |
|---|---|
| Type | Combination, Open & Box End Wrenches |
Questions about this item
How much clearance does the 2 in head and 22 3/4 in overall length need in a tool chest?
The wrench measures 22 3/4 inches long with a 2 inch head, so allow at least that depth plus a small margin for the 15 degree offset.
What is the correct way to seat the 15 degree offset box end on a 2 in fastener?
Engage the box end fully over the fastener with the 15 degree offset angled toward the pull direction; the common error is using the open end when high torque is needed.
When should the aluminum bronze nickel wrench be inspected or replaced?
Inspect the 2 in opening and 15 degree offset surfaces for rounding or cracks after heavy use; replace if the box end no longer grips the fastener securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
