American Torch Tip Company
American Torch Tip Gas Lens Collet Body 3/32 in Stub 2-pack 45V64S
Large-diameter gas lens collet body fits 3/32-inch stub electrodes and works with Series 9, 20 and 200–375 torches, two per pack
- TypeWelding Supplies
- Wide gas-coverage lens improves shielding on TIG torches
- Stub 3/32 in collet body fits 0.09375 in maximum electrode
- Two-piece pack gives a spare for workshop continuity
- Large-diameter design matches WP-9, WP-20 and HW series torches
- Compatible with 20, 25, 320 and 375 series power sources
Welding Gas Lens Collet Body
This two-pack supplies large-diameter gas lens collet bodies for TIG welding torches. Each stub-length body accepts electrodes up to 0.09375 in diameter. The parts are compatible with a wide range of Series 9 and Series 20 torch models including WP-9, WP-20, HW-9 and HW-20 variants.
Suited for TIG torch maintenance
Welders who service compatible air- or water-cooled torches from the listed series will find these direct replacements. The stub profile fits tight torch-head clearances where standard-length bodies cannot seat. Buyers using torch models outside the Series 9 or 20 families, or who require a different electrode bore size, should verify fitment before ordering.
Electrode capacity and coverage
The collet body handles maximum electrode diameters of 0.09375 in, covering common 3/32 in tungsten sizes used in precision fabrication. The two-piece pack provides a spare for quick changeover during production runs. Torches requiring larger electrode bores or standard-length gas lens bodies fall outside this item's specification.
Highlights
- Wide gas-coverage lens improves shielding on TIG torches
- Stub 3/32 in collet body fits 0.09375 in maximum electrode
- Two-piece pack gives a spare for workshop continuity
- Large-diameter design matches WP-9, WP-20 and HW series torches
- Compatible with 20, 25, 320 and 375 series power sources
Specifications
| Brand | AMERICAN TORCH TIP |
|---|---|
| Type | Welding Supplies |
Questions about this item
Which torch models will the 3/32 in stub collet body fit without an adapter?
The collet body fits WP-9, WP-9F, WP-9V, WP-20, WP-20P, WP-25, PTA-9, PTW-20, HW-9, HW-20, HW-25 and the 20, 9, 20P, 9F, 9V series torches listed in the compatibility data.
Can I use these collet bodies on my existing WP-20 torch while keeping the original nozzle and gas lens?
Yes, the 45V64S is designed for WP-20 series torches and works with the existing nozzle and large-diameter gas lens already on the torch.
How do I verify the gas lens is seated correctly after installing the 45V64S collet body?
After installation, confirm the collet body sits flush in the torch head, the electrode extends 0.09375 in maximum, and shielding gas flows evenly through the lens screen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
