American Torch Tip Company
American Torch Tip Company GPN-3 Victor Series GPN Size 3 Cutting Tip
Victor-compatible two-piece cutting tip for handheld or machine torches using natural gas or propane, cutting 2 to 2½ in steel at 9–14 in/min with a 0.1 in kerf
- TypeWelding Parts & Supplies
- Cuts 2 in to 2 1/2 in thick material with a .1 in kerf
- Medium preheat flame suits general purpose cutting on hand-held or machine torches
- Two-piece GPN series tip works with natural gas or propane fuels
- Oxygen flow 150 to 200 scfh cutting and 23 to 108 scfh preheat
- Fuel flow 14 to 18 scfh enables cutting speeds from 9 to 14 in/min
American Torch Tip GPN-3 Cutting Tip
The Victor Series GPN Size 3 tip fits handheld and machine torches for general-purpose cutting. It accepts natural gas or propane and uses a two-piece design rated for steel between 2 in and 2 1/2 in thick.
Sustained cutting performance
Oxygen flow runs at 150 to 200 scfh during the cut and 23 to 108 scfh for preheat, while fuel consumes 14 to 18 scfh. The medium preheat flame maintains a .1 in kerf at speeds from 9 to 14 in/min.
Installation and common issues
The tip threads onto compatible Victor-style torches without tools. Leaks usually come from worn O-rings or mismatched seating surfaces, so inspect both faces before lighting.
Highlights
- Cuts 2 in to 2 1/2 in thick material with a .1 in kerf
- Medium preheat flame suits general purpose cutting on hand-held or machine torches
- Two-piece GPN series tip works with natural gas or propane fuels
- Oxygen flow 150 to 200 scfh cutting and 23 to 108 scfh preheat
- Fuel flow 14 to 18 scfh enables cutting speeds from 9 to 14 in/min
Specifications
| Brand | AMERICAN TORCH TIP |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
How much oxygen does the GPN-3 tip consume during a full day of cutting?
The tip uses 150 to 200 scfh of oxygen while cutting and 23 to 108 scfh during preheat, so total daily use depends on how long the torch runs at each stage.
What torch and gas setup is required before this tip can be used?
You need a Victor-compatible handheld or machine torch plus a supply of natural gas or propane and oxygen regulated to the listed flow ranges.
Will this tip fit the older Victor torch handle I already own?
Yes, the GPN-3 is built for Victor torches, so it threads onto existing Victor handheld or machine handles without an adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
