American Lock
American Lock A3651D035KA key control, alike, 2 in shackle, 5 pin
Keyed-alike brass padlock with a 5-pin cylinder and hardened boron shackle for secure access control
- Keyed alike for simple access control
- 5-pin cylinder resists picking attempts
- 2-inch boron shackle withstands cutting force
- Brass body resists corrosion in outdoor use
- Yale No. 8 keyway supports existing key systems
Keyed-alike padlock for managed access
The American Lock A3651D035KA is a keyed-alike padlock designed for facilities that need multiple locks opened by a single key. It suits security perimeters, construction sites, remote substations, tool cribs and storage rooms where controlled entry is required. The brass body and boron shackle resist cutting and corrosion in outdoor or industrial settings. No control-key registration is needed, simplifying key management for maintenance teams.
Brass body and boron shackle resist tampering
The unfinished brass body measures 1 3/4 inches wide by 2 inches high and 3/4 inch thick, while the boron shackle is 5/16 inch in diameter with a 2-inch clearance and 7/8 inch internal width. Five-pin Yale No. 8 keyway provides pick resistance without electronic components that could fail. The lock operates mechanically, so there is no power draw, fan noise or thermal output to consider in normal use. California Proposition 65 warnings apply to chemicals in the materials.
Sustained outdoor exposure does not degrade function
Under continuous outdoor exposure the brass body and boron shackle maintain mechanical operation without performance loss over time. The keyed-alike configuration ensures consistent access across all units keyed to number 03T1111, even after repeated daily cycles. No batteries, firmware or thermal throttling affect long-term reliability, making the padlock suitable for permanent installation on perimeter gates and remote enclosures.
Highlights
- Keyed alike for simple access control
- 5-pin cylinder resists picking attempts
- 2-inch boron shackle withstands cutting force
- Brass body resists corrosion in outdoor use
- Yale No. 8 keyway supports existing key systems
Specifications
| Brand | AMERICAN LOCK |
|---|
Questions about this item
How do I install the 2 in shackle on a hasp or chain, and what step is often missed?
Insert the 5/16 in diameter boron shackle through the hasp or chain link, push down until both locking notches engage, then turn the key to verify both sides are secured; the step often missed is confirming the second notch has fully clicked.
What maintenance will the 5 pin Yale No. 8 cylinder need over time?
Apply a dry PTFE lubricant into the keyway once a year and operate the key several times to distribute it; avoid oil-based products that attract grit and can jam the five pins.
What limit appears first when the padlock is left outdoors in a coastal construction site?
The unfinished brass body will develop surface oxidation before the boron shackle shows corrosion, so inspect the gold coloured body regularly and wipe away salt deposits to maintain appearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
