American Lock
American Lock A3650D045KA key control padlock keyed alike 1-1/8" shackle
Keyed-alike brass padlock with a boron shackle for shared-access security on gates and storage rooms
- 5-pin cylinder resists picking
- Boron shackle withstands cutting attacks
- Brass body resists corrosion outdoors
- Keyed alike simplifies multi-lock management
- Schlage C keyway fits existing systems
Solid brass padlock for keyed-alike access
This American Lock padlock uses a solid brass body measuring 2 inches high by 1-3/4 inches wide. A 5/16-inch boron shackle provides 1-1/8 inches of vertical clearance and 7/8 inches of horizontal clearance. The lock operates on a Schlage C keyway with a five-pin cylinder and ships keyed alike to key number 04T1111.
Suited for managed master-key systems
Facilities that need multiple locks opened by a single key benefit from the factory-set alike configuration. No control key registration is required, simplifying deployment across perimeter gates, tool cribs and storage rooms. Buyers who need unique key codes for each lock or a registered restricted keyway should look at a different model.
Brass body resists corrosion during long outdoor
The unfinished brass construction withstands weather on construction sites and remote substations without the pitting that can seize steel-bodied locks. Boron shackle material maintains cut resistance after repeated hard use. The five-pin cylinder continues to operate smoothly when dust and grit accumulate inside the keyway over months of daily cycling.
Highlights
- 5-pin cylinder resists picking
- Boron shackle withstands cutting attacks
- Brass body resists corrosion outdoors
- Keyed alike simplifies multi-lock management
- Schlage C keyway fits existing systems
Specifications
| Brand | AMERICAN LOCK |
|---|
Questions about this item
Does the 5-pin Schlage C keyway need a matching Schlage C cylinder to operate?
The lock uses a 5-pin Schlage C keyway and is supplied keyed alike to key number 04T1111, so it works with the included keys without any additional cylinder.
Can the 1-1/8 inch boron shackle fit the same hasp staples I use for 1-inch shackles?
The shackle diameter is 5/16 inch and the height is 1-1/8 inch, so it will fit hasp staples that accept a 5/16 inch shackle and provide at least 1-1/8 inch of vertical clearance.
How can I confirm the padlock is keyed alike to the 04T1111 code after I receive it?
Insert the supplied key marked 04T1111; the 5-pin cylinder should turn smoothly and the boron shackle will release, confirming the keyed-alike configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
