We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium dual vertical monitor stand with two adjustable arms and VESA plates

Amer Mounts

Amer Mounts AMR2SV Dual Vertical Monitor Stand 15-24 inch 100x100 75x75

SKU CH-CZ8H-YPN7R

Holds two 15 to 24 inch screens vertically on a single base with 75×75 and 100×100 VESA patterns, 90 degree rotation and height adjustment

  • TypeMount
  • Supports two 15 to 24 inch monitors vertically
  • 100×100 and 75×75 VESA patterns fit most screens
  • Aluminium alloy frame keeps the setup stable
  • 90 degree rotation plus height adjustment for ergonomics
  • Smart torque and angle adjust simplify positioning

Dual Vertical Monitor Stand 15-24 Inch

The Amer Mounts AMR2SV holds two LCD screens between 15 and 24 inches in a stacked vertical layout. It frees desk surface area while letting each display sit at its own height for ergonomic viewing. VESA 75x75 and 100x100 patterns are supported so most modern monitors attach without adapters. The aluminium-alloy frame keeps the structure light yet rigid for daily repositioning.

Arm Angle-Adjust and Smart Torque Control

Each arm pivots independently and locks at the chosen angle through a torque-adjustment mechanism that prevents drift under the monitor’s weight. Height adjustment runs the full length of the vertical column so screens can be aligned at eye level or staggered for standing use. The 90-degree rotation lets you switch a panel to portrait orientation without tools. No power draw or cooling is involved because the stand is purely mechanical.

Aluminium-Alloy Build and Tool-Less Setup

The all-metal construction resists flex when both arms are extended, keeping dual-monitor alignment stable over time. Installation uses a simple clamp or grommet base that secures to the desk in minutes with the included hardware. No software, drivers or calibration routines are required; the stand works immediately with any display that matches the VESA patterns and size range.

Highlights

  • Supports two 15 to 24 inch monitors vertically
  • 100×100 and 75×75 VESA patterns fit most screens
  • Aluminium alloy frame keeps the setup stable
  • 90 degree rotation plus height adjustment for ergonomics
  • Smart torque and angle adjust simplify positioning

Specifications

TypeMount

Questions about this item

How do I attach the AMR2SV to my desk and which step is often missed?

Clamp or grommet-mount the base, then secure each VESA plate to the monitor using the 75×75 or 100×100 holes; the step most people skip is tightening the Smart Torque Adjust screw so the arms hold position without drifting.

What maintenance will the AMR2SV need over time?

Periodically re-check the torque-adjustment screws on both arms and the height-lock collar; aluminium-alloy joints do not require lubrication, but the set screws can loosen after repeated 90-degree rotations.

What is the first limit I will hit when stacking two 24-inch monitors vertically?

The stand supports monitors from 15 to 24 inches, so the height range and combined weight capacity become the limiting factors before the 90-degree rotation or VESA compatibility would.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.