ALSEYE
ALSEYE 4Pin XLR Female to 3Pin XLR Male 24V DC Power Cable 20cm
Connects 24V 4-pin XLR sources to 3-pin XLR camera inputs in a 20 cm cable
- Powers 24V camera systems up to 33.6V
- 20cm cable links 4-pin XLR female to 3-pin XLR male
- Rated for over 5000 mating cycles
- Full EMC shielding with shock and vibration resistance
- Each assembly tested for continuity and high-voltage breakdown
24V DC Camera Power Cable
This cable adapts a four-pin XLR female source to a three-pin XLR male input for 24V DC camera systems. It is intended for operators who need a short, reliable link between power supplies and compatible cinema or broadcast cameras. The twenty-centimetre length keeps rigs tidy without excess slack.
Thermals, Noise and Power Draw
As a passive cable assembly it generates no heat, emits no noise and draws no power of its own. The conductors simply pass the supply voltage up to thirty-three point six volts for cameras such as the Alexa35. Rated for more than five thousand mating cycles, the connectors resist shock, vibration and corrosion in daily use.
Four-Pin to Three-Pin XLR Polarity
The single specification that decides fit is the four-pin XLR female to three-pin XLR male wiring for twenty-four volt DC systems. Buyers whose cameras require a different pin count, voltage or connector type cannot use this cable. No other adapters or voltage conversions are included.
Highlights
- Powers 24V camera systems up to 33.6V
- 20cm cable links 4-pin XLR female to 3-pin XLR male
- Rated for over 5000 mating cycles
- Full EMC shielding with shock and vibration resistance
- Each assembly tested for continuity and high-voltage breakdown
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4-pin XLR female end to my 24V camera system, and which pin orientation do installers often reverse?
Plug the 4-pin XLR female connector into the camera’s 24V DC input, aligning the keyway; the 3-pin XLR male goes to the power source. The step most often missed is confirming pin-1 polarity on both ends before powering a 33.6V max load.
What maintenance will the connector contacts need after repeated mating cycles?
The XLR contacts are rated for 5000 insertions; no scheduled cleaning is required, but inspect for corrosion or bent pins if the cable sees vibration or frequent disconnects in field use.
At what sustained voltage does the cable’s insulation rating become the limiting factor?
The assembly is tested for high-voltage breakdown and intended for 24V systems up to 33.6V; sustained operation above 33.6V exceeds the verified insulation margin.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
