ALSEYE
ALSEYE 12 inch 4:3 LCD monitor 800x600 HDMI VGA BNC AV 2 in 1 accessory
A 12 inch 4:3 LCD display with 800x600 resolution, 400 cd/m² brightness and HDMI, VGA, BNC, AV plus USB inputs for CCTV, Raspberry Pi or teleprompter use
- Image flip modes suit teleprompter or vehicle mounting
- 12 inch 4:3 LCD at 800x600 with 400 cd/m² brightness
- 165 degree view angle and 450:1 contrast for clear visuals
- HDMI VGA BNC AV USB ports connect cameras, Pi, CCTV
- VESA 75 bracket and desktop stand included for flexible mounting
12 inch 4:3 LCD monitor
This 12 inch monitor delivers an 800x600 resolution at a 4:3 aspect ratio with 400 cd/m brightness and a 450:1 contrast ratio. The 165 degree viewing angle keeps colours consistent from the side. It suits teleprompter operators, CCTV installers, Raspberry Pi developers and anyone needing a compact secondary display.
Sustained operation
The panel maintains its 800x600 output continuously without resolution scaling or refresh throttling. HDMI, VGA, AV and CVBS-only BNC inputs stay active during long monitoring sessions. The image mirror function provides left, right, up and down flipping for teleprompter or vehicle mounting without software overhead.
Thermals and power
Passive cooling keeps the unit silent in desktop or VESA 75 mm wall mounting. Built-in speakers handle audio cues without external hardware. Low power draw allows operation from standard USB supplies used with single-board computers or portable CCTV kits.
Highlights
- Image flip modes suit teleprompter or vehicle mounting
- 12 inch 4:3 LCD at 800x600 with 400 cd/m² brightness
- 165 degree view angle and 450:1 contrast for clear visuals
- HDMI VGA BNC AV USB ports connect cameras, Pi, CCTV
- VESA 75 bracket and desktop stand included for flexible mounting
Specifications
No published specifications for this item yet.
Questions about this item
Does the 12 inch screen run hot or make noise during all-day use?
The unit is a fanless LCD panel with built-in speakers, so it produces no mechanical noise and only modest warmth during continuous operation.
Which cables or adapters must I already have to connect this monitor?
You need an HDMI, VGA, AV or BNC cable that matches your source; the BNC input accepts only CVBS analogue signals, so SDI, TVI, CVI or AHD cameras require a separate converter.
Will the 800x600 4:3 display work correctly with a legacy CCTV recorder that outputs composite video?
Yes, the BNC port accepts CVBS composite signals natively, and the 165-degree viewing angle keeps the picture readable from off-centre positions.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
