We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two pairs of black 6.5 inch coaxial car speakers with silver tweeters and a pry kit

Alpine

Alpine SXE-1726S 6.5" 2-way coaxial car speakers 2-pair

SKU CH-SP0C-ST2AW

Two pairs of 6.5-inch coaxial speakers with 40 W RMS power and 220 W peak handling

  • TypeSpeaker
  • Two pairs cover front and rear for full cabin sound
  • 40 W RMS handles daily listening without strain
  • 220 W peak copes with sudden transients cleanly
  • 60 Hz–20 kHz response reproduces bass through treble
  • Kapton voice coil resists heat for lasting performance

Alpine SXE-1726S 6.5" coaxial speakers

This bundle supplies two pairs of Alpine SXE-1726S 6.5-inch two-way coaxial speakers for a full four-door installation. A pry kit and a Creative Audio coozy are included to assist with panel removal and everyday use. The speakers suit owners who want a straightforward factory replacement without separate component mounting.

40 watts RMS continuous power handling

Each speaker handles 40 watts RMS and peaks at 220 watts, so the system sustains typical head-unit output without thermal compression. The 4-ohm nominal impedance matches most original-equipment amplifiers and aftermarket stereos. Kapton voice-coil formers resist heat buildup during extended listening sessions.

Upgrade from worn or single-cone factory units

Replacing aged paper-cone drivers restores the 60 Hz to 20 kHz bandwidth that the original system has lost over time. The ferrite woofer magnet and neodymium tweeter magnet deliver stronger motor force than basic OEM designs. Buyers who require external crossovers, larger cones or dedicated midrange drivers should consider component systems instead.

Highlights

  • Two pairs cover front and rear for full cabin sound
  • 40 W RMS handles daily listening without strain
  • 220 W peak copes with sudden transients cleanly
  • 60 Hz–20 kHz response reproduces bass through treble
  • Kapton voice coil resists heat for lasting performance

Specifications

TypeSpeaker

Questions about this item

How much heat does the 40 W RMS voice coil produce during all-day highway use?

The Kapton voice coil handles 40 W RMS continuously, so thermal load stays within the speaker’s rated limits during extended play.

What amplifier or head-unit output is required to drive the 4 Ω nominal impedance?

Any car stereo or amplifier rated for 4 Ω loads — typically 20–60 W per channel — will power the SXE-1726S properly.

Will the 60 Hz – 20 kHz range match the roll-off of an older factory head unit?

The 60 Hz low end aligns with most OEM decks, while the 20 kHz tweeter extends above typical factory response for clearer highs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.