ALLIED TUBE & CONDUIT
ALLIED TUBE & CONDUIT 160-021 Liquid-Tight Flex Plastic Conduit 3/4 in Trade Size
Liquid-tight flexible PVC conduit protects cables in 3/4 in trade size with a 1 in bend radius
- TypeCable Management & Conduit
- Liquid-tight conduit protects wiring from moisture and oil
- CSA and UL approvals confirm code-compliant safety standards
- Flexible PVC jacket bends to a one-inch radius for tight installs
- Rated from zero to 140 degrees Fahrenheit for wide temperature range
- 100-foot coil provides ample length for long runs
Liquid-Tight Flex Plastic Conduit 3/4 in Trade Size
This liquid-tight flexible plastic conduit is designed for electrical wiring protection in damp or outdoor locations. It suits installers who need a non-metallic raceway that resists oil and ultraviolet exposure while remaining pliable for routing around obstacles. The black PVC jacket meets CSA and UL approval ratings for code-compliant installations.
Flame-retardant PVC jacket with CSA and UL approval
The conduit features a flame-retardant PVC jacket that is oil resistant and UV resistant for durability in harsh environments. Its 3/4 inch trade size provides an inside diameter of 0.82 in and an outside diameter of 1.05 in. A bend radius of 1 in allows tight turns without kinking, simplifying pulls through structural members and around equipment.
Operating temperature range 0 to 140 degrees F
The product operates reliably between 0 degrees F and 140 degrees F, limiting use in extreme cold or high-heat process areas. Supplied in a 100 ft nominal length, it requires cutting and fitting on site for longer continuous runs. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- Liquid-tight conduit protects wiring from moisture and oil
- CSA and UL approvals confirm code-compliant safety standards
- Flexible PVC jacket bends to a one-inch radius for tight installs
- Rated from zero to 140 degrees Fahrenheit for wide temperature range
- 100-foot coil provides ample length for long runs
Specifications
| Brand | ALLIED TUBE & CONDUIT |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
What is the bend radius of the 3/4 in liquid-tight conduit and how does it affect routing?
The bend radius is 1 in, allowing tight turns in confined spaces without kinking the flame-retardant PVC jacket.
What are the exact inside and outside diameters for fitting connectors?
Inside diameter is 0.82 in and outside diameter is 1.05 in, so use 3/4 in trade-size liquid-tight fittings that match these dimensions.
How do you install this conduit and what is the common mistake to avoid?
Cut squarely, slide the ferrule and gland nut over the jacket, then thread the body on until the ferrule seats; the frequent error is forgetting the ferrule, which breaks the liquid-tight seal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



