allentian
allentian 7x CREE XM-L T6 LED flashlight 8000lm 24.5/30.5cm
High-output LED flashlight delivering up to 8000 lumens from seven CREE XM-L T6 emitters with five modes including strobe and SOS
- TypeLED
- Up to 8000lm output from 7x CREE XM-L T6 LEDs
- 100,000-hour LED lifespan reduces replacement needs
- Five modes including strobe and SOS for versatile use
- Wide 7.4V-11.2V input maximises battery utilisation
- Waterproof aluminium alloy body with coated glass lens
High-output flashlight for outdoor use
This flashlight uses seven CREE XM-L T6 LEDs to deliver up to 8000 lumens. It runs on either two or three 26650 batteries and offers five modes including High, middle, low, strobe and SOS. The aluminium alloy body and coated glass lens resist water and scratches. A holster and extension tube are included.
Sustained performance with efficient driver
The internal booster circuit accepts a wide input range from 7.4 V to 11.2 V with a 16 V maximum, letting the cells discharge fully while maintaining regulation across modes. LED life is rated at 100,000 hours, so output remains stable over extended use. The tail clicky switch provides reliable mode cycling during long sessions.
Check power source and length before ordering
You must supply two or three 26650 cells as batteries are not included; verify you have a compatible charger for this chemistry. The light measures 24.5 cm without the extension tube and 30.5 cm with it fitted, so confirm the longer configuration fits your pack or mount. No other accessories are required.
Highlights
- Up to 8000lm output from 7x CREE XM-L T6 LEDs
- 100,000-hour LED lifespan reduces replacement needs
- Five modes including strobe and SOS for versatile use
- Wide 7.4V-11.2V input maximises battery utilisation
- Waterproof aluminium alloy body with coated glass lens
Specifications
| Type | LED |
|---|
Questions about this item
Does the 8000lm output generate much heat during extended use?
The high-efficiency booster circuit runs on a wide 7.4V-11.2V input to utilise the batteries fully, and the aluminium alloy casing acts as a heatsink for the 7x CREE XM-L T6 LEDs.
Which batteries do I need to supply myself for the 7.4V-11.2V input range?
You must provide either two or three 26650 cells; the included extension tube lets you choose the 2-cell or 3-cell configuration.
Will the tail clicky switch still operate reliably if I keep using older 26650 cells?
The wide working voltage of 7.4V-11.2V (16V max) means the booster circuit continues to drive the LEDs even as cell voltage drops with age.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Every Day Carry Hook-and-Loop Belt Pouch Leaf Camo 11cm
- Multi
- Multi-Color



